Dionex Ultimate 3000 TCC-3000SD HPLC Column Compartment, Thermo Fisher Scientific (CAT#: STEM-C-0300-LGZ)

The manufacturer of Dionex Ultimate 3000 TCC-3000SD HPLC Column Compartment is Thermo Fisher Scientific. Model is Ultimate 3000 TCC-3000SD. Thermo Scientific™ Dionex UltiMate™ TCC-3000SD standard thermostatted column compartment supports temperatures from 5°C to 80°C. Precise and precise temperature-controlled application of standard flow rates ensures consistent retention times. Column switching valve (field upgradeable) Optional, you can utilize application switching or parallel and serial two-dimensional liquid chromatography (2D-LC) to improve separations and productivity with X2 Dual Technology.

Condition: used
Temperature Range: 5 °C to 85 °C (max. 18 °C below ambient)
Temperature Accuracy: ±0.5 °C
Temperature Stability: ±0.1 °C
Temperature Precision: ±0.1 °C
Column Capacity: Up to 6 columns, max. 30 cm length
Heat-up Time: Typically 15 minutes 20 °C to 50 °C
Cooldown Time: Typically 18 minutes 50 °C to 20 °C
Control: All functions software controlled via USB
I/O interfaces: 2 digital inputs, 2 programmable relay outputs
Switching valves: 1 or 2 thermostatted valves (2-position, 6-port, 2-position, 10-port, or 6-position, 7-port)


Watted parts


Stainless steel (1.4571, 316L), PEEK; Waste line: PTFE
Column switching valve (stainless steel): Vespel and DuraLife
Column switching valve (biocompatible): PEEK
Column switching valve (6-position, 7-port): Titanium
Safety features: Humidity sensor and gas sensor. Temperature control and temperature sensors


User input/display


LCD-indicating system parameters
Standby button
3 LEDs for status monitoring (Power, Connected, Status)
4 function keys for operation during initial installation and maintenance
GLP features: Electronic identification system for 4 columns. In Chameleon: Full support of automatic equipment qualification (AutoQ) and System System Wellness monitoring. All system parameters are recorded in the Chromeleon Audit Trail.
Power requirements: 100 - 120 V, 60 Hz; 200 - 240 V, 50 Hz, max. 150 VA
Environmental conditions: Indoor use only; 10 to 35°C (50 to 95°F) operating temperature range; 80% relative humidity (non-condensing); Overvoltage category 2; Pollution degree 2.
Dimensions (H x W x D): 17 x 42 x 51 cm (6.7 x 16.5x 20 in)
Weight: 13.2 kg (29.0 lbs)

1. The UltiMate TCC-3000SD standard thermostatted column cabinet is recommended for use with all Thermo Scientific™ Dionex™ UltiMate™ 3000 standard (SD) LC systems.
2. Temperature stability ranges from 5 ° to 80 °C ±0.5 °C and ±0.1 °C, simplifying method optimization.
3. Precise control of different ambient temperatures to ensure accurate holding time.
4. Fast heating/cooling times can significantly reduce the delay between method switches.
5. Mobile phase preheater makes peaks clearer and better resolution.

Agilent 1260 Infinity Series- G1316A HPLC Column Compartment, Agilent Technologies(CAT#-STEM-C-0083-LGZ)
Waters Acquity H Class Column Manager UPLC Column Manager, Waters Corporation(CAT#-STEM-C-0131-LGZ)
Waters Column Compartment HPLC Column Compartment, Waters Corporation(CAT#-STEM-C-0182-LGZ)
Waters Column Heater Module HPLC Column Compartment, Waters Corporation(CAT#-STEM-C-0183-LGZ)
Waters Column Water Heater HPLC Column Compartment, Waters Corporation(CAT#-STEM-C-0184-LGZ)
Rheodyne EV500-104 Column Selector, Rheodyne(CAT#-STEM-C-0194-LGZ)