Digital Online Blue-Green Algae Sensor, 000cells/ mL (CAT#: STEM-AL-4004-ZJF)

Digital Online Blue-Green Algae Sensor is designed for continuous online measurement of blue-green algae. The sensing element converts the water-quality response into an electrical signal. Digital communication transfers measured values to a compatible controller or monitoring platform. The documented measurement range defines the intended analytical operating window. Integrated electronics support calibration data and configured operating parameters. The housing and sealing arrangement support immersion or flow-cell installation as specified. Temperature compensation or an integrated temperature element is used where documented. Low-power operation supports long-term monitoring installations. The sensor supports repeatable online measurement within the stated environmental limits.

Measured Parameter: blue-green algae
Measurement Range: 000cells/ mL
Measurement Principle: UV fluorescence
Detection Limit: 200cells/mL
Resolution: 1cells/mL
Minimum Flow Velocity:>0.02 m/s
Ingress Protection: IP68
Temperature Range: 0-60 °C(non-freezing)
Sensor Interface: RS-485,Modbus
Installation: immersion installationNPT3/4
Power Consumption: <1W
Dimensions: Φ45*178mm
Probe Cable Length: 5 m(standard),customizable
Housing Material: stainless steel

Supports continuous online measurement
Digital communication enables controller integration
Sealed construction supports water monitoring
Low-power electronics suit long-term deployment
Calibration parameters can be retained
Temperature compensation is available where configured
Multiple installation methods support process or environmental use