DGJ-40E In-Situ Freeze Dryer, -70 °C, 0.40 m² (CAT#: STEM-AL-4586-ZJF)

DGJ-40E In-Situ Freeze Dryer, -70 °C, 0.40 m² is designed for in-situ freeze-drying of cosmetic, food, and temperature-sensitive samples. The system freezes the loaded material and removes ice by sublimation under reduced pressure. The documented cold-trap limit is ≤ -70 °C. The available drying area is 0.40 m². The documented vacuum target is ≤5 Pa. The documented water or ice capture capacity is 8 kg. The loading arrangement uses 4 shelves. Electronic control records operating parameters and supports process review through stored curves or exported data where specified. The system supports repeatable freeze-drying within the documented temperature, vacuum, load, and environmental limits.

Cold-Trap Limit: ≤ -70 °C
Drying Area: 0.40 m²
Maximum Ice Capture: 8 kg
24-Hour Ice Capture: 3 kg
Rated Vacuum: ≤5 Pa
Ultimate Vacuum: ≤1 Pa
Shelf Configuration: 4 shelves
Shelf Size: 400 × 250 mm
Shelf Spacing: 45 mm
Shelf Temperature Range: -45 to +50 °C
Vial Capacity: 1,240 × 16 mm or 650 × 22 mm
Bulk Batch Capacity: 4 kg
Power: 2.7 kW
Dimensions: 740 × 850 × 1,280 mm excluding stoppering assembly
Net Weight: 170 kg

Controlled shelf cooling and heating for in-situ processing
PLC touchscreen with automatic or semi-automatic programs
Drying chamber and cold-trap system arranged for process control
Vacuum protection with automatic pump stop and pressure balancing
Process data logging, curve display, and USB export
Low-temperature refrigeration with compressor protection
Recipe storage and optional remote monitoring according to configuration