Denitration Catalyst Evaluation System 1 L (CAT#: STEM-AL-3445-ZJF)

Denitration Catalyst Evaluation System 1 L is a continuous-flow reaction system designed for denitration catalyst evaluation. The reactor holds a defined catalyst bed while controlled gas or liquid feeds pass through the active zone. The heating section establishes the required reaction environment around the catalyst. Metering components regulate the stated feed streams and operating flow ranges. The reactor material and downstream configuration support the specified process media. Temperature and pressure are monitored through the configured control architecture. Sampling or product-handling provisions support evaluation of reaction performance. Protective control functions address abnormal operating conditions where specified. The system supports repeatable catalyst screening and process-condition development within the documented limits.

Catalyst Element Size: 60 × 60 × 200 mm
Reactor Volume: 2100 mL
Total System Power: 13 kW
Power Requirement: 380 V/50 Hz
Grounding Resistance: < 4 Ω
Reactor Operating Temperature: 100-800 °C
Preheater Operating Temperature: 300 °C
Operating Pressure: atmospheric pressure
Total Gas Flow: 8 L/min
Liquid Feed Flow: 0-2 mL/min
Operator Interface: 10-inch touchscreen
Temperature-Control Accuracy: ± 1 °C
Flowmeter Accuracy: ± 1 % F.S.

Defined catalyst-bed section supports controlled contact with process feeds
Heated reaction zone maintains the catalyst operating environment
Temperature monitoring supports catalyst-bed comparison
Downstream handling supports product sampling or analysis
Modular process layout supports catalyst screening workflows
Compact laboratory configuration supports process-development work
Defined operating boundaries support repeatable experimental conditions