Corrosion-Resistant Automatic High-Vacuum Drying Oven DZF-F210DC, 210 L (CAT#: STEM-AL-6338-ZJF)

The DZF-F210DC is a laboratory corrosion-resistant automatic high-vacuum drying oven designed for vacuum-assisted drying and heat treatment. It heats samples inside a sealed chamber while a connected vacuum system lowers the internal pressure. The controller regulates chamber temperature, operating time, vacuum-related functions, and any automatic valve or door sequence specified for the model. The available display and control interface support parameter entry, status review, and routine cycle operation. The chamber, platform, bath, or working surface is sized for the vessel and sample configurations stated in the technical data. Integrated monitoring and protection functions support stable operation within the specified limits. The equipment is suitable for vacuum-assisted drying and heat treatment in research, quality-control, and general laboratory workflows. Its defined configuration supports repeatable processing, consistent sample handling, and traceable operating conditions.

Model: DZF-F210DC
Display: 5-inch touchscreen
Operating Mode: Selectable
Power Supply: 220 V AC 50 Hz
Temperature Range: Ambient +10°C to 250°C (200°C)
Temperature Resolution: 0.1°C
Stability: ±1°C
Ultimate Vacuum: 20-100000pa
Vacuum Accuracy: 2000pa 1pa 100pa 0.1pa
Operating Ambient Temperature: 5°C-40°C
Heating Method: ()
Heating Power: 2400 W(per layer800 W)
Total Power: 3300 W
Chamber Dimensions: 560 × 580 × 640
Overall Dimensions: 730 × 750 × 1560()
Equipment Weight: Approx. 230 kg
Standard Shelves: 3 pcs()
Shelf Spacing: Approx. 18 cm
Timer Range: 1-9999 (min / h selectable)
Door Configuration: door opening
Observation Window: glassYesglass
Capacity: 210 L

Sealed vacuum chamber
Controlled thermal drying
Vacuum gauge or sensor interface
Timed operation
Temperature regulation
Laboratory sample shelves
Touch-screen operation
Selectable programmed operation