Chroma 19054 In Lake Mary, FL, USA (CAT#: STEM-AIPO-0335-YJL)

Chroma 19054 In Lake Mary, FL, USA, model 19054, is manufactured by Chroma electrical safety testers.
The Chroma Hipot Tester 19050 series provide 3 models for choice. The 19052 for AC/DC/IR Hipot testing and insulation resistance (IR) measurements; and the 19053 which combines both AC and DC Hipot tests and IR measurements with 8HV scan channel capability into a single compact unit. The front panesl of the fevers make them easy to operate and the 19054 which combines both AC and DC Hipot tests and IR measurements eith 4HV scan channel capability into a single compact unit. Digital display and user friendly control allows test parameters and limits to be set easily without the high voltage activating

Condition: Used
Output Voltage: AC: 0.05 ~ 5kV, DC: 0.05 ~ 6kV
Load Regulation: 26.4555(1%+5V)
Voltage Resolution: 2V
Voltage Accuracy: 1% of setting + 5 count
Cutoff Current: AC: 0.1 ~ 30mA, DC: 0.01 ~ 10mA
Current Resolution: AC: 1µA, DC: 0.1µA
Current Accuracy: ±(1% of reading + 5 counts)
Output Frequency: 50Hz / 60Hz
Test Time: 0.3 ~ 999 sec., continue
Ramp Time: 0.1 ~ 999 sec., off
Fall Time: 0.1 ~ 999 sec., off
Dwell Time: 0.1 ~ 999 sec., off
Waveform: Sine wave

AC/DC/IR 3 in 1 hipot tester
AC 5kV and DC 6kV output
1kV insulation resistance test
Insulation resistance measurement from 1M to 50
Open Short Check(OSC) function
GFI shutdown the instrument when imbalance current > 0.5mA

Chroma 11200 In Lake Mary, FL, USA (CAT#: STEM-AIPO-0318-YJL)
Chroma Fura 2 71000 510, Microscope Fluorescence Filter Cube (8021)W In Goleta, CA, USA (CAT#: STEM-AIPO-0320-YJL)
Chroma 11021-L In Lake Mary, FL, USA (CAT#: STEM-AIPO-0321-YJL)
Chroma 19073-232 In Lake Mary, FL, USA (CAT#: STEM-AIPO-0322-YJL)
Chroma 19073-485 In Lake Mary, FL, USA (CAT#: STEM-AIPO-0323-YJL)
Chroma 19055-C In Lake Mary, FL, USA (CAT#: STEM-AIPO-0325-YJL)
Chroma 19057-3 In Lake Mary, FL, USA (CAT#: STEM-AIPO-0326-YJL)