Chroma 19035 In Lake Mary, FL, USA (CAT#: STEM-AIPO-0283-YJL)

Chroma 19035 In Lake Mary, FL, USA, model 19035, is manufactured by Chroma.
The quality verification test items for Wound Components primarily are AC/DC Hipot tests and Insulation Resistance (IR) tests. The Chroma 19035 Wound Component EST Scanner Series perform these and other safety tests for motors, transformers, and heater related wound products. These scanners make for reliable quality control and efficient product control when implemented for quality verification by wound component manufacturers.
The Chroma 19035 Series supports 5kVac/6kVdc high voltage output to conform with withstand voltage test requirements for wound components, and has a maximum output current up to 30mA. The Insulation Resistance (IR) test measurement ranges from 1MO to 50GO, and voltage output can be up to 5kV; while the DCR test can measure the resistance parameters of wound components and test circuit connections (contact check) before the withstand voltage test is performed.
The 19035 Series also has powerful functions for Flashover detection and Open/Short Check (OSC), as well as programmable voltage and time parameters for various characteristics of DUTs for increased testing reliability and product quality.

Condition: Used
Test frequencies: 100Hz, 120Hz, 1kHz and 10kHz (9.6kHz)
Basic accuracy: 0.1%
Resistance range high: 100MOhm
Capacitance range high: ~99.99 mF
Measurements: Z, L, C, Q, D, Phase, R, X

5KVAC & 6KV DC Hipot Test
1mΩ~50GΩ /5kV IR Test
10mΩ~100kΩ DCR Test
8 Channel Scanner
High Speed Contact Check (HSCC)
Supports 16CH scan box (19035 only)

B&K Precision 731A Anemometer With Wand Probe, 0 To 5900 ft/min In San Diego, CA, USA (CAT#: STEM-AIPO-0196-YJL)
Beckman Coulter Multisizer, 0.4 µm to 1200 µm In New Jersey, USA (CAT#: STEM-AIPO-0214-YJL)
Beckman Coulter Vi-Cell MetaFlex, 100-240 VAC In Taunton, MA, USA (CAT#: STEM-AIPO-0233-YJL)
Beckman Coulter Vi-Cell XR In Taunton, MA, USA (CAT#: STEM-AIPO-0234-YJL)
Beckman Coulter Multisizer 3 Particle Counter, 0.4 µm to 1200 µm diameter In Ramsey, MN, USA (CAT#: STEM-AIPO-0243-YJL)
Oxygen Meter Beckman In New Jersey, USA (CAT#: STEM-AIPO-0269-YJL)
Biorad In2it® 501122R.1 Analyzer In Bloomington, MN, USA (CAT#: STEM-AIPO-0276-YJL)