BUC5F-310C C-mount USB3.0 CMOS Microscope Camera (IMX123 Sensor, 3.1MP), 3.1 MP (CAT#: STEM-AL2-6868-ZJF)

The BUC5F-310C C-mount USB3.0 CMOS Microscope Camera (IMX123 Sensor, 3.1MP) is designed for microscope image capture, video acquisition, and digital analysis. BUC5F-310C(With IMX123(C) Sensor) USB3.0 digital cameras adopt CMOS sensor as the image-picking device and USB3.0 is used as the transfer interface. The source specifies sensor as 3.1M/IMX123(C). The source specifies sensor size(mm) as 1/2.8" (5.12x3.84). The source specifies pixel size(μm) as 2.5x2.5. The camera converts microscope images into digital still images or video through the source-specified sensor and interface. Resolution, frame rate, exposure, binning, and sensor-format information are retained when they are stated for the selected model. The camera is intended to integrate with microscope imaging software and standard optical coupling hardware described in the source.

Sensor: 3.1M/IMX123(C)
Sensor Size(mm): 1/2.8" (5.12x3.84)
Pixel Size(μm): 2.5x2.5
FPS: 50@2048x1536
Binning: 1x1 1x1
Exposure: 0.1ms~15s

Exmor R(Back-illuminated), Exmor RS CMOS sensor with USB3.0 interface,
Real-time 8/12bit depth switch(depending on sensor),
Ultra-fine
HISP VP and USB3.0 5 Gbps interface ensuring high frame rates (Up to 17 frames for 21MP Resolution),
Super high sensitivity up to 2350mV(IMX385),
Ultra low noise and low power dissipation by using column-parallel A/D conversion,
With hardware resolution among 1.5M to 21M,
Rolling Shutter or Global Shutter,