Box Resistance Furnace SX2-2.5-12TDP, 1000°C (CAT#: STEM-AL2-4090-ZJF)

The SX2-2.5-12TDP box resistance furnace is a laboratory heating instrument for controlled high-temperature processing. It is intended for material sintering, melting, heat treatment, volatilization studies, and related thermal procedures. Samples are placed inside an enclosed furnace chamber that provides a defined heating environment. Electrical resistance heating supplies thermal energy to the chamber during operation. Temperature feedback is used by the control system to regulate the heating process. The chamber construction and refractory materials are selected for repeated laboratory heating cycles. The furnace door provides direct access for loading and unloading samples while separating the operator from the hot zone. The unit is suited to routine laboratory workflows that require controlled and repeatable thermal treatment.

Chamber Dimensions/Volume: 200 x 120 x 80mm (2L)
Chamber Material: Ceramic fiber (aluminum silicate)/Al2SiO5
Design Temperature: 1000°C
Operating Temperature: <= 900°C
Temperature Accuracy: ±1°C
Thermocouple Type: K / K
Heating Rate: 40°C/min
Control Interface: 5-inch color touch screen
Control Mode: 1-40 segment programmed heating or single-point heating
Power Control: Segmented power control
Program Memory: 9 programs
Shutdown Timer: 1-999 min
Power Supply: AC 220 V, 50 Hz / AC 380 V, 50 Hz
Heating Power: 2.5KW

Integrated large-door construction
Inner and outer door arrangement
Door-open automatic power cutoff
Dual-point temperature sensing
Furnace-door observation window
Single-point and programmed heating modes
Segmented power control with power-failure restart