Bio-Rad PTC1196 Controller, Bio-Rad (CAT#: STEM-PE-0630-LGZ)

The manufacturer of Bio-Rad PTC1196 Controller is Bio-Rad. Model is PTC1196. Includes: 96-Well Alpha Block, Power Cord, Manual.

Condition: used
Thermal Range: 5 to 105C, but no more than 30C below ambient temperature (4 to 100C for the Slide Chambers Alpha unit)
Thermal Accuracy: 0.3C of programmed target at 90C, NIST-traceable
Thermal Uniformity: 0.4C well-to-well within 30 seconds of arrival at 90C (for most Alpha units; see specifications for individual Alpha units)
Ramping Speed: Up to 3C/sec for all single- and dual-block Alpha units; up to 1.2C/sec for the Slide Chambers Alpha unit.
Sample capacity: Varies with installed Alpha unit
Line Voltage: DNA Engine cycler: 100240 VAC rms (no adjustment needed among voltages within these ranges)
Frequency: 5060 Hz single phase
Power: DNA Engine cycler: 850 W maximum
Fuses: Two 6.3 A, 250 V, 5 x 20 mm
Displays: One 20 x 4 LCD alphanumeric display
Ports: One 25-pin 8-bit parallel interface printer port One 9-pin RS-232 serial port for printer or remote use One IEEE-488 bidirectional general purpose interface bus
Memory: 400 typical programs in up to 12 individual folders

1. With thermal valve cover.
2. Peltier effect heat pump.
3. The rate of increase is rapid.
4. The temperature is uniform.
5. Incubation projects are very accurate.
6. Power failure protection function.

Eppendorf Mastercycler Pro PCR / Thermal Cycler, Eppendorf(CAT#-STEM-PE-2089-LGZ)
Eppendorf MasterCycler Pro S PCR / Thermal Cycler, Eppendorf(CAT#-STEM-PE-2090-LGZ)
Eppendorf Mastercycler X50h PCR / Thermal Cycler, Eppendorf(CAT#-STEM-PE-2091-LGZ)
Eppendorf Mastercycler X50i PCR / Thermal Cycler, Eppendorf(CAT#-STEM-PE-2092-LGZ)
Eppendorf Mastercycler X50p PCR / Thermal Cycler, Eppendorf(CAT#-STEM-PE-2093-LGZ)
Thermo Electron MBS PCR / Thermal Cycler, Thermo Fisher Scientific(CAT#-STEM-PE-2094-LGZ)