Benchtop Vacuum Drying Oven DZF-6090T, 90 L (CAT#: STEM-AL-6011-ZJF)

The DZF-6090T is a laboratory benchtop vacuum drying oven designed for vacuum-assisted drying and heat treatment. It heats samples inside a sealed chamber while a connected vacuum system lowers the internal pressure. The controller regulates chamber temperature, operating time, vacuum-related functions, and any automatic valve or door sequence specified for the model. The available display and control interface support parameter entry, status review, and routine cycle operation. The chamber, platform, bath, or working surface is sized for the vessel and sample configurations stated in the technical data. Integrated monitoring and protection functions support stable operation within the specified limits. The equipment is suitable for vacuum-assisted drying and heat treatment in research, quality-control, and general laboratory workflows. Its defined configuration supports repeatable processing, consistent sample handling, and traceable operating conditions.

Model: DZF-6090T
Operating Mode: Selectable
Power Supply: 220 V AC 50 Hz
Temperature Range: Ambient +10°C to 250°C (200°C)
Temperature Resolution: 0.1°C
Stability: ±1°C
Ultimate Vacuum: -0.1mpa(100pa)
Operating Ambient Temperature: 5°C-40°C
Heating Method: ()
Heating Power: 1200 W(per layer600 W)
Total Power: 1500 W
Chamber Dimensions: 450 × 450 × 450
Overall Dimensions: 630 × 670 × 850()
Equipment Weight: Approx. 120 kg
Standard Shelves: 2 pcs()
Shelf Spacing: Approx. 17cm
Timer Range: 1-9999 (min / h selectable)
Door Configuration: door opening
Observation Window: glassYesglass
Capacity: 90 L

Sealed vacuum chamber
Controlled thermal drying
Vacuum gauge or sensor interface
Timed operation
Temperature regulation
Laboratory sample shelves
Selectable programmed operation
Vacuum process control