Benchtop pH Meter NBPM-200, -2.000~20.000 pH, LABNICS EQUIPMENT LTD. (CAT#: STEM-AIAE-0071-LC)

Benchtop pH Meter NBPM-200 manufactured by LABNICS EQUIPMENT LTD. is designed for measurement of pH and other parameters. It features built-in real-time clock that meets the GLP regulatory standards of any laboratory setting. It enables automatic temperature compensation for accurate display of reading value over the entire pH range. The subsequent reminder alerts for calibration aids in maintaining the smooth functioning of a meter.

pH Range: -2.000~20.000 pH
Accuracy: ±0.002pH
Resolution: 0.1, 0.01, 0.001pH, Selectable
Calibration Points: 1 to 5 points
Calibration Solutions: USA, NIST, DIN or User-defined
Temperature Compensation: 0~100°C, 32~212°F
mV Range: -1999.9~1999.9 mV
mV Accuracy: ±0.2mV
mV Resolution: 0.1, 1mV, Selectable
mV Calibration Points: 1 point (Only for Relative mV mode)
mV Calibration Range: ±200mV
Temperature Range: 0~105°C, 32~221°F
Temperature Accuracy: ±0.5°C, ±0.9°F
Temperature Resolution: 0.1°C
Calibration Range: Measured value ±10°C
General Hold Function: Manual or Automatic
Stability Conditions: Low or High
Calibration Due: 0 to 31 days
Power off: Manual or Automatic (10, 20, 30 minutes)
LCD Display dimensions: 130 × 110 mm
Power Supply: DC5V, AC adapter, 220VAC/50Hz
Dimensions (L×W×H): 210 × 188 × 60 mm
Weight: 1.5 kg

Large backlit LCD display
Selectable pH buffer standard (USA/NIST/DIN) for automatic calibration
Automatic electrode slope display to guide the user whether to replace sensor
Easy reading and recording of measured data with Auto-Hold function
Selectable temperature unit (�C or �F) meets different application requirements
Automatic electrode diagnosis shows zero point offset and slopes of the pH electrode
Automatic Reset function resumes all parameters back to factory default settings
Expandable memory stores and recalls up to 500 readings
Easy transfer of data via USB communication interface