Beckman J6-B High Capacity Centrifuge, 6000 RPM, Beckman Coulter (CAT#: STEM-LCPO-0064-LGZ)

The Beckman J6-B high-capacity centrifuge has an extensive feature list, including a traditional brushed motor and a reliable analog display. This Beckman model also features advanced cooling options, a performance speed of 6,000 rpm, and a maximum power of 6,835 grams.

Condition: certified pre-owned
Maximum Speed: 6000 rpm
Maximum Speed: Any speed outside the rotor’s critical speed range (~600 to 800rpm). Critical speed is the speed at which a rotor shifts from rotation about its center of mass. Critical Speed is characterized by some vibration.
Maxium RCF: 6840 x g
Maximum Rotor Capacity: 6 liters
Driver System: 1.2 kW (1 ½ hp) dc motor; belt-driven driveshaft.
Speed Control: Rotor Speed meter reading is within 50 rpm of setting on Speed dial, and within 150 rpm of actual rotor speed. Control rage is 0 to 6000 rpm.
Acceleration Time: Minimum 15 seconds (JA-21 rotor), maximum 2.5 minutes (JS-4.2 rotor).
Braking System: Electronic, variable braking
Maximum Braking Time: At maximum brake setting: no more than twice the acceleration time.
Temperature Control: Sample temperature is within 2°C of the desired temperature; within 1° if calibration has also been performed.
Temperature Control Range: 0 to 40°C at full speed; as low as -25°C at reduced speed
Ambient Range: 16°C to 38°C (60°F to 100°F)
Maximum Heat Output (During Operation): 1.9 kW (6500 Btu/h)
Timer: Times up to 30 minutes (60 Hz instruments) or 36 minutes (50 Hz instruments), or HOLD; graduated in 1-minute increments
Rotor Chamber Diameter: 580 mm (23”)

Electrical Requirements:
3-wire single phase
Range for 208V/60Hz 187-223 V
Range for 240V/60Hz 224-264 V
Range for 220V/50Hz 210-224 V

Dimensions:
Right side (for tilting up door): 150mm (6”)
Left side:150mm (6”)
Back( distance from condenser fins to wall, essential for adequate ventilation):150 mm (6”)
Net weight: 252kg (555 lbs)
Height to door top(door closed): 940mm (37”).
Height to work surface(door open): 910mm (35.5”)
Overall height: 1270mm(50”)
Overall width: 711mm (28”)
Overall depth(without bracker): 825mm (32.5”)
Height with door open (left side): 1600mm(63”)

Conventional brush motor
Analog displays and controls
Advanced refrigeration capability

Beckman Coulter Optima XPN-100 Ultracentrifuge, 100,000 RPM, Beckman Coulter (CAT#-STEM-LCPO-0099-LGZ)
Beckman Coulter XE-90K Ultracentrifuge, 485 kg, Beckman Coulter (CAT#-STEM-LCPO-0100-LGZ)
Beckman L-80XP Ultracentrifuge, 1,000 to 80,000 RPM, Beckman Coulter (CAT#-STEM-LCPO-0101-LGZ)
Beckman L8-70M Ultracentrifuge, 1000-7000 RPM, Beckman Coulter (CAT#-STEM-LCPO-0102-LGZ)
Beckman L8-80M Ultracentrifuge, 0-45°C, Beckman Coulter (CAT#-STEM-LCPO-0103-LGZ)
Beckman Optima L-70 Ultracentrifuge, 70,000 RPM, Beckman Coulter (CAT#-STEM-LCPO-0104-LGZ)