Beckman Airfuge Ultracentrifuge, 110,000 RPM ± 5,000 RPM, Beckman Coulter (CAT#: STEM-LCPO-0040-LGZ)

The Beckman Coulter Air Centrifuge is an air-driven, ultra-compact ultracentrifuge designed for a variety of applications. With its outstanding ability to provide an easy and fast method to remove chylomicrons, the Airfuge system brings reliable results for lipid clarification and eliminates the need for sending.

Even as a compact unit, the Airfuge air-driven centrifuge delivers results in a fraction of the time compared to larger units. The combination of high gravity and short path length yields very short run times. For advanced speed readout, optional digital speed readout accessory.

Beckman Airfuge Ultracentrifuges are designed to simplify centrifugation applications. Operating around ambient temperature, the unit reaches top speed in just 30 seconds and decelerates smoothly to keep sample contents separated. Additionally, the centrifuge offers up to 5 hours of timed operation with a hold position for longer runs.

Beckman Coulter Airfuge air-driven ultracentrifuges also offer enhanced versatility with a variety of rotors. It can be used with batch rotors for particles with large particles, electron microscope rotors to deposit very small volumes, and four fixed-angle rotors to generate the high speeds and forces required to perform a variety of tasks.

Condition: certified pre-owned
Max Speed: 110,000 rpm ± 5,000 rpm
Max G Forge: 199,000 x g
Drive System: Air turbine drive
Air Pressure at Ultracentrifuge for Routine Operation: 30 psig (210 kPa)
Acceleration Time: 30-60 seconds
Deceleration Time: 2.5-5.5 minutes
Speed Control: Air-pressure regulation
Speed Readout: By conversion of air pressure reading from instrument gauge. An optional Digital Speed Readout Accessory (347592) is available.
Braking System: Coasting, then frictional braking by engagement of brake pin.
Temperature Range: Rotor temperature is a few degrees above ambient. Developing
Timer: 0-300 minutes in five-minute increments, HOLD for longer runs
Dimensions(W x H x L ; Weight): 11 in. x 8 in. x 15 in. (280 mm x 200 mm x 380 mm); 23 lb. (10.4 kg)
Air and Power Requirements: To perform to specifications, an air flow rate of 3.5 cubic feet per minute (0.0016 m3/s) at 42 psig (290 kPa) is required. The unit is equipped with six feet (1.83 m) of flexible air hose and attaches to a standard 1/4 in. (6.35 mm) male hose connector. A filter is supplied to avoid contamination by removing oil and water from compressed air. Power requirements are 120 volt, 60 Hz, or 220 volt, 50 Hz.

Air driven ultracentrifuge
Rotors Not Included
Smooth acceleration and deceleration
Run for a limited time, up to 5 hours, use HOLD for long-distance running
Work around ambient temperature
Various rotors for various applications
Includes full performance proof certificate
Certified Pre-Owned Vehicle (Eligible for One Year Warranty)

Beckman Allegra 6 Benchtop Centrifuge, Operating Temperature -5 to +25 ºC, Beckman Coulter (CAT#-STEM-LCPO-0023-LGZ)
Beckman Allegra 6 Benchtop Centrifuge, Operating Temperature Ambient, Beckman Coulter (CAT#-STEM-LCPO-0024-LGZ)
Beckman Allegra X-15R Centrifuge, Weight 128 kg, Beckman Coulter (CAT#-STEM-LCPO-0025-LGZ)
Beckman GS-6 Series Centrifuge, Weight 114 lbs, Beckman Coulter (CAT#-STEM-LCPO-0026-LGZ)
Beckman GS-6 Series Centrifuge, Weight 163 lbs, Beckman Coulter (CAT#-STEM-LCPO-0027-LGZ)
Beckman GS-6 Series Centrifuge, Weight 167 lbs, Beckman Coulter (CAT#-STEM-LCPO-0028-LGZ)