attoLIQUID2000 Cryogenic System, 900 x 750 x 1500 mm, attocube systems AG (CAT#: STEM-LE-1614-Y)

The attoLIQUID 2000 Cryogenic System is manufactured by attocube systems AG. The attoLIQUID2000 superconducting magnet system is based on an efficient liquid helium bath cryostat with a 50 l cryogenic reservoir. But it also includes a variable temperature insert (VTI) that can easily control the temperature between 1.8 K and 300 K.

Technology: liquid helium bath cryostat with VTI, vacuum isolation, vapor shielding (shielding LN2 as required)
Temperature range: 1.8 .. 300 K
Estimated static loss rate of liquid helium: about 0.35 liters/hour (standard version, no plug-in)
Sample cooling time: about 30 minutes
Temperature stability: <±0.1%
Cryostat (width x depth x height): about 900 x 750 x 1500mm³ (including attoDAMP)
Liquid helium dewar: 50 liters capacity, vacuum isolation, vapor shielding (shielding LN2 as required)

attoDAMP anti-noise and vibration cabinet;
Support sensitive measurements such as LT-SPM;
Superconducting (vector) magnets up to 12 T;
Enable MFM, SHPM, NV center magnetometer;
Constant temperature constant temperature bath thermostat;
Temperature range: 1.8. . 300K;

attoLIQUID1000 Cryogenic System, 900 x 750 x 1500 mm, attocube systems AG (STEM-LE-1613-Y)
attoDRY2100 Automated Top-loading Cryostat, 49.7 mm Sample Space, attocube systems AG (STEM-LE-1612-Y)
attoDRY800 Optical Cryostat, 75 mm Sample Space, attocube systems AG (STEM-LE-1611-Y)