ATP Surface Cleanliness Fluorescence Meter RFE-3, 15 s Per Sample (CAT#: STEM-AL-9927-ZJF)

The RFE-3 ATP surface cleanliness fluorescence meter is intended for rapid ATP-based monitoring of surface cleanliness. It uses bioluminescent ATP detection and reports results in relative light units. The source lists a sensitivity of 1 × 10^-16 mol/L for standard ATP. Signal acquisition is listed at 2000 samples per second and one specimen can be analyzed in 15 seconds. Repeatability is specified with a coefficient of variation no greater than 8%. The source lists a correlation coefficient of at least 99.5% and an error limit of ±4% or ±4 relative light units. The meter stores 2000 records and supports USB and Bluetooth communication. Overall, it provides a source-defined configuration for rapid ATP-based monitoring of surface cleanliness.

Product Type: ATP Surface Cleanliness Fluorescence Meter
Model: RFE-3
Detection Principle: ATP Bioluminescence
Sensitivity: 1 × 10^-16 mol/L Standard ATP
Acquisition Rate: 2000 Samples/s
Test Time: 15 s Per Specimen
Repeatability: CV ≤8%
Correlation: ≥99.5%
Error: ≤±4% Or ±4 RLU
Data Capacity: 2000 Records
Interfaces: USB, Bluetooth
Dimensions: 86 × 189 × 33 mm
Weight: 200 g
Power: 2 AA Batteries, ≥200 h

ATP Bioluminescence Detection
Fifteen-Second Measurement
High-Speed Signal Acquisition
Stored Measurement Records
USB Connectivity
Bluetooth Connectivity