ASE 300 Accelerated Solvent Extractor, Dionex (CAT#: STEM-CPO-0787-ZJF)

The manufacturer of the ASE 300 Accelerated Solvent Extractor, Dionex is Dionex.
Refurbished Dionex ASE 300 accelerated solvent extractor complete with 12-position carousel for extraction cells, 12-position carousel for collection bottles, (12) 250 mL collection bottles and manual.
Extractions that normally take hours can be done in minutes using Accelerated Solvent Extraction. Compared to techniques like Soxhlet and sonication, ASE generates results in a fraction of the time. It allows for the extraction of up to 100 mL quickly and easily using minimal amounts of solvent to handle all of your extraction needs. It can extract up to 12 samples unattended. The system has automatic rinsing between sample extractions and ability to schedule programming for automated method optimization. The ASE 300 is idea for laboratories with more than 40 samples per week with a sample size greater than 30 grams.

Condition: Refurbished, Certified Pre-owned
Oven:
Accepts 34, and 66, 100 mL (internal volume) size cells
Auto-seal actuator places cell into oven and returns cell to tray after extraction
Temperature control up to 200 ̊ C
Vertical cell orientation with flow from top to bottom
Pump:
Fluid delivery pressure at 1500 psi
Automatic pressure sensor and pressure relief during heat-up
Fluid Sensors: IR sensors detect he arrival off luid into the collection via land fluid levels during extract collection Display and
Keyboard:
Menuoperated
LCD 7 x 40 character display
Method and schedule editor
Method and schedule storage
Extraction Cells:
34,66,100 mL size cells
Internal cell diameter: 28.3mm
Hand-tight cell caps with compression seal for high-pressure closure
Extraction Cell Tray:
12 cell positions
2 rinse positions
Automatic home position sensing
Multiple extractions per cell
Collection Bottle Tray:
12 bottle positions plus 1 bottle positions for rinse/waste collection
Tray compatible with 250mL collection bottles
Collection Bottles:
250 mL, VOC certified
Bottle lids with solvent-resistant septa (TFE-coated on solvent side)
Extraction Fluids: Compatible with a wide range of organic and aqueous-based solvents
Dimensions: (h x w x d): 59.4 cm x 58.8 cm x 60.4 cm (23.4 in x 23.1 in x 23.8 in)
Weight: 75.2 kg (165.4 lbs.)
Power Requirements:
Consumption:
Voltage: 500–VA (watts) max. 100–240 V ac, 50–60Hz
Pneumatic Requirements:
Airat400–827 kPa (60–120psi)
N at 1034–1340 kPa (150–200 psi)
Optional: Solvent Controller, Extraction Cells with caps (34 mL (p/n 056768) (new p/n: 060071), 66 mL (p/n 056769) (new p/n: 060072) & 100 mL (p/n 056770) (new p/n: 060073) sample cells available), Dionex Circles 30mm (p/n 056780).

Refurbished to meet manufacturer's specification
In excellent condition
Thoroughly cleaned
Money back guarantee
Certified with warranty

ASE 200 Accelerated Solvent Extractor, Dionex
Bio LC System, Dionex
CD20 Conductivity Detector, Dionex