LHS Pipetting Workstation, BrandTech Scientific (CAT#: AM-AUTO-0335-LY)

The LHS Pipetting Workstation is manufactured by BrandTech Scientific. The pipette system adopts the principle of air piston, which is the same as the piston pipette widely used in the laboratory. Suitable for medium sample flux. The workstation can replace the simple, repetitive (and error prone) routine liquid transfer operations, and can also perform complex liquid transfer tasks, such as PCR, qPCR and other liquid transfer tasks, effectively completing the task.

Pipetting end: Single channel pipetting end (SC), 8-channel pipetting end (MC)
Volume range: Single channel pipetting end: 1 - 50 μl, 10 - 200 μl, 40 - 1000 μl
8-channel pipetting end: 1 - 50 μl, 20 - 300 μl
Working position: 8 working positions: P2 - P8, P1 for waste tip box
Weight: approx. 25 kg
Dimensions: length 595 x width 485 x height 530 mm (off)
Length 595 x width 485 x height 690 mm (open)
Operating temperature : +15 °C - +35 °C
Shipping temperature: -20 °C - +65 °C
Input voltage: 100 - 240 V, 50/60 Hz
Insurance: 2 x T 2.5A H 250V
Interface: 1 USB
Power consumption: up to 150 W
Protection level: protection level I
Housing: Protection level IP20
Safety standard: IEC 61 010-1
EMC compatibility: Radio interference and immunity to interference DIN EN 61 326-1
Noise level: 46 Db

Comprehensive
Seven freely adjusted working positions can be adapted from single tube to 384 orifice plate to meet almost all liquid transfer requirements.
Visual
In a few minutes, you can create as simple a way as possible - intuitive software without programming experience.
Compact
Only 60 x 49 cm can hold 8 working spaces – height is only 53 cm