ALC-IP900TG Micro Syringe Pump, 0.005μl/hr, SHANGHAI ALCOTT BIOTECH CO., LTD. (CAT#: STEM-DS-2088-LC)

The ALC-IP900TG Micro Syringe Pump manufactured by SHANGHAI ALCOTT BIOTECH CO., LTD. is used for scientific experiments in biomedicine, pharmacy, chemistry, physics and other related liquid fields. This pump rrecisely controls the injection rate for continuous and stable liquid infusion.

Flow rate unit: ml/min, ml/hr, μl/min, μl/hr
Syringe specification: 5μl~60ml
Minimum flow rate: 0.005μl/hr (0.08nl/min)
Maximum flow rate: 1720ml/hr (28.66ml/min)

Multifunctional programmable automatic micro syringe pump
Powerful programming ability, automatic cycle, long-term operation up to several months
Two syringes can be installed at the same time. One syringe for injection and the other one for withdrawn
The two syringes are installed in reverse and proceed simultaneously
Microcomputer controll, convey liquid smoothly without pulsation
Precisely control the injection rate for continuous and stable liquid infusion
Arbitrary setting of programming parameters
Automatically complete various tasks from simple injection to complex injection/withdrawal
Setting parameters include injection or withdrawal tasks, volume, speed, running time, pause, continue, number of cycles, etc
The specified part of the program can be continuously executed repeatedly
The cycle program can be set in the cycle task
The injection task and the withdrawal task are performed independently
The total amount of injection and withdrawal is accumulated respectively
Automatically change the running speed and direction of travel
Automatically accelerate or decelerate
Pause at any time, or automatically pause for a certain period of time to continue running
The appointment time can be set, and the operation will start automatically when the time is reached
There are several built-in program templates for quick and easy programming
The set parameters can be saved as an experiment template
The experiment template parameters can be edited and modified
Separate control mode is adopted to facilitate separate experimental operation
Quick run function for quick emptying or suction
With alarm function and memory function
The syringe can be customized without restricting the brand of syringe used
Both plastic syringes and glass syringes can be installed on the syringe pump
The LCD display is intuitive and clear
The touch adjustment buttons are easy to use

NE-4000 Programmable 2 Channel Syringe Pump, New Era Pump Systems (CAT#: STEM-DS-0650-LSY)
NE-1010 Higher Pressure Syringe Pump, New Era Pump Systems (CAT#: STEM-DS-0649-LSY)
NE-1000 Programmable Single Syringe Pump, New Era Pump Systems (CAT#: STEM-DS-0648-LSY)