Agilent 6100 Quadrupole LC/MS Systems, 100 – 650m/z, HP Agilent (CAT#: STEM-CPO-0045-YJL)

Agilent 6100 Quadrupole LC/MS Systems, 100 – 650m/z, model STEM-CPO-0045-YJL, is manufactured by HP Agilent.

Condition: Certified Pre-Owned
Mass Range: 6130 Quad: m/z 2 – 3000
Mass Accuracy: ± 0.13 u within the calibrated mass range in scan mode
Mass Axis Stability: The mass drift does not exceed the larger absolute value of ± 0.1 Da or ± 100 ppm of measured mass over a 12 hour period at constant temperature ± 3 degrees centrigrade.
Scan Speed: 6130 Quad: 2500 u/s standard mode, 5250 u/s fast scan mode
SIM Sensitivity:
ESI at 400 µ/min or APCI at 1000 µ/min
Selected ion monitoring of m/z 609.3
Positive ionization
6130 and 6140 Quad: 1 pg reserpine, 100:1 RMS (20:1 peak-to-peak)
Scan Sensitivity*:
ESI at 400 µ/min or APCI at 1000 µ/min
Scan range m/z 100 – 650
Scan speed 2500 u/s
Extracted ion at m/z 609.3
Positive ionization
6130 and 6140 Quad: 50 pg reserpine, 100:1 RMS (20:1 peak-topeak)
Flow Rate:
ESI: Up to 1.0 ml/min water without a flow splitter
APCI: Up to 1.5 ml/min water without a flow splitter
Multisignal acquisition (6120, 6130 and 6140 Quad only): Ability to cycle through four acquisition modes on a scan-by-scan basis within a single run. Up to four analysis modes can be viewed in the software window and can be linked together to facilitate processing and analysis. Modes of operation: positive/negative polarity switching, variable fragmentor voltage selection, and concurrent SIM/scan.
Operating Conditions: Temperature range: 15 ℃ to 35 ℃ (59 °F to 95 °F) Relative humidity: less than 95 % (non-condensing)
Dimensions** Height: 65 cm (26 in) Width: 39 cm (15 in) Depth: 75 cm (29 in W:
Height: 65 cm (26 in)
Width: 39 cm (15 in)
Depth: 75 cm (29 in
Weight: 50 kg (110 pounds)
**Approximate maximum cabinet dimensions with G1947A APCI source attached but without external mechanical pump. Height and width slightly less with G1948A ESI source.

High-performance design features
Orthogonal-flow sprayer with pneumatic nebulizer – enhances sensitivity across a wide range of LC conditions and reduces maintenance requirements.
High-capacity solvent drying system – reduces chemical noise and permits the analysis of thermally-sensitive compounds through user control of gas flow rate and gas temperature.
Dielectric platinum-plated capillary – enhances sensitivity, permits independent optimization of the spray chamber and ion optics, and allows dynamic optimization of in-source fragmentation.
Air-cooled turbomolecular pump – provides fast startup and a small footprint, and eliminates the need for cooling water. Single, split-flow turbo pump enhances performance and increases reliability.
Fraction collection capability – can monitor and trigger the collection of fractions based on mass, an analog signal input, or time. For mass-based determination, up to 16 m/z values can be monitored. Requires optional I/O Accessory Module.
Faster answers. Maximum confidence.
Best-in-class data quality in a space saving benchtop package.
Unmatched analysis speed boosts productivity
Faster acquisition speeds let you take full advantage of UHPLC separations.
Ultra fast ion polarity switching gives you maximum information from a single injection—even with narrow LC peaks.
Faster injection-to-injection cycle times let you run more samples per hour.
Advanced analytical capabilities increase confidence
Even at scan speeds up to 10,000 u/sec, you get excellent spectral quality and accurate isotope ratios for confident ID and confirmation.
Variable energy, in-source, collision induced dissociation (CID) provides valuable structural information.
Multi-signal capability lets you analyze more compounds per run.
Simple, intuitive operation saves time and improves results
Intuitive Agilent ChemStation software lets you set up and control both LC and MS from a single screen; integration with MassHunter software adds analytical power.
Powerful Autotune feature eliminates the need for manual recalibration.
Comprehensive automation capabilities allow walk-up sample submission and unattended operation.

Agilent G1956 LC MSD Mass Spectrometer, HP Agilent (CAT#: STEM-MSPO-0001-YJL)
API 4000 LC/MS/MS System, API (CAT#: STEM-MSPO-0002-YJL)
Thermo Scientific TSQ Endura Triple Quadrupole Mass Spectrometer w/software, 41 × 38 × 37 in, Thermo Scientific (CAT#: STEM-MSPO-0003-YJL)
Thermo Scientific TSQ Endura w/Transcend II LX-4 & Ultimate Pumps UHPLC, 32L/min, Thermo Scientific (CAT#: STEM-MSPO-0004-YJL)
Thermo Scientific TSQ Quantum GC Triple Quad GC/MS System w/TriPlus Autosampler, Thermo Scientific (CAT#: STEM-MSPO-0005-YJL)