Advantage Engineering Sentra VE Series Temperature Controller, Advantage Engineering, Inc. (CAT#: STEM-GLEPO-0289-ZJF)

The Advantage Engineering Sentra VE Series Temperature Controller is manufactured by Advantage Engineering, Inc.
Water temperature control units are engineered to provide precise fluid temperature control over a wide range of applications.
These units are used to preheat industrial processes to the desired operating temperature by recirculating water through the process and engaging the unit’s electric immersion heater.
After reaching the operating temperature, the unit can continue to add heat or become a cooling device by precisely exchanging & mixing cooling water (supplied from an external source) with the recirculated water to maintain tight temperature control.
This temperature control unit requires a plant water supply source.
Temperature control units are portable, built on casters to easily move the unit between processes.
Temperature can for these units is 32°F to 250°F.
The pre-owned products will be thoroughly cleaned and fully tested to perform at manufacturer specifications before shipping.

Condition: Certified Pre-Owned
Electrical: 460V, 60Hz, 13.53Amps, 3 Phase
Model: SK-1035-VE
Heater
kW: 10
Process Pump
HP: 3/4
GPM: 35
PSI: 30
Cooling Valve
Type: Solenoid
Size: 3/8"
Control Instrument
Type: VE Series
Maximum Temperature: 250°F
Minimum Temperature: 32°F
Construction
Electrical: Nema 1 control cabinet with branch circuit protect
Cabinetry: ABS fascia with stainless steel enclosure panels
Full Load Amperage
230/3/60: 28.6
460/3/60: 14.3
575/3/60: 11.9
Connection Sizes
To Process: 1¼"
From Process: 1¼"
Water Supply: ½"
Drain: ½"
Dimensions
Height: 28¼"
Width: 12½"
Depth: 19½"
Weight(6)
Shipping: 208 lbs

Process Pump:
High flow centrifugal pump and motor in one assembly
3/4 horsepower
Custom designed pump casing & impeller generates high flow rate
Turbulence generated by high flow rates improves heat transfer and promotes better part quality
Horizontal orientation and internal seal area flush extends pump seal life
Integral fluid bypass reduces performance problems associated with low flow
Open drip proof motor
Electrical:
DIN rail mounted UL approved finger safe electrical components
Color coded & numbered wires are easy to identify for service purposes
Control instruments are plug to plug for easy removal for service
IEC motor starter with overload, phase loss & short circuit protection
Rugged IEC mechanical heater contactor
Cabinetry:
Stainless steel electrical cabinet & enclosure panels
Polymer front panel
2" casters for portability
Heater:
10kW
Low water density for long operational life
High temperature rated stainless steel sheath minimizes damage from dissolved chemicals in water
Flange mounted for easy service
Cooling Valve:
Precision control solenoid cooling valve
Pulsed cooling, controlled by the microprocessor instrument
For precise temperature control
System Limits:
Discreet high temperature limit switch
Control circuit fuse
Process pressure relief valve
Water supply switch prevents operation when water supply is below 55 psi
Pressure Gauges:
Provides full process performance information
To process
From process

Machine Solutions RK-300-100 Temperature Controller, AutoTherm
Watlow EZ-Zone Digital Temperature Controllers - Quantity 4, Watlow
Beckman Coulter Temperature Controller, Beckman Coulter
Watson Marlow Temperature Controllers - Quantity 3, Watson Marlow
Research Engineering Plethysmograph Heater Controller, Unknown
Beckman Coulter Temperature Controller, Beckman Coulter
Laboratory Devices Mel-Temp II Controller, Laboratory Devices Inc
BriskHeat BSAT051002 Temperature Controller, BriskHeat Corporation
BriskHeat SDC120JC-A Temperature Controller, BriskHeat Corporation