Advanced Instruments 3D3 Osmometer, Advanced Instruments (CAT#: STEM-DTE-1687-LGZ)

The manufacturer of Advanced Instruments 3D3 Osmometer is Advanced Instruments. Model is 3D3 Osmometer. The Advanced Instruments 3D3 is an automated, single-sample design that allows the processing of samples from 0.20 to 0.25 mL in approximately 2 minutes.

Condition: used
Electrical
Power Requirement: 100 to 130 VAC (60 Hz) or 200 to 250 VAC (50 Hz)
Fuses (2): 250V time delay (Type T): 2-Amp (100-130 VAC), 1-Amp (200-250 VAC)
Power Consumption: 150 watts
Memory Backup: Integral lithium cell; 10 years typical
Sample Volume: 0.20 to 0.25 mL
Sample Capacity: Single sample
Readout: 20-character digital display
Units: mOsm/kg H2O
Ranges:
Low: 0 to 2000 mOsm/kg H2O
High: 1400 to 4000 mOsm/kg H2O
Resolution: 1 mOsm/kg H2O
Communications: DTE RS-232C, parallel printer, barcode
Performance at Reference Conditions
Linearity: Less than ±0.5% from straight line
Repeatability: 0 to 400 mOsm ±2 mOsm/kg (1 S.D.) 400 to 4000 mOsm ±0.5% (1 S.D.)
Drift: Less than 1 digit per month
Performance Over Reference Conditions
Temperature Effect: 1 digit for every 5 °C (9 °F) ambient temperature change
Operating Conditions Temperature:
18 °C to 35 °C (64 °F to 95 °F)
Humidity: 5 to 80% R.H. (non-condensing)
Storage Temperature: - 40 °C to +45 °C (-40 °F to +113 °F)
Start-up Time: From Stand-By: immediately
From Power On: under 5 minutes
Test Time: Approximately 2 minutes per sample in 0 to 2000 mOsm range; moderately longer in high range.
Dimensions
0 cm x 32.0 cm x 42 cm
(11.5" H x 12.5" W x 16.5" D)
Height With Head Up: 41 cm (16" H)
Weight
Net: 12 kg (27 lbs.)
Shipping: 18 kg (38 lbs.)

1. Use Freezing Point Depression (FPD) to determine the permeability of a solution.
2. Automated, single sample.

Advanced Instruments 2020 Osmometer, Advanced Instruments(CAT#-STEM-DTE-1684-LGZ)
Advanced Instruments A2O Osmometer, Advanced Instruments(CAT#-STEM-DTE-1691-LGZ)