5913 Dissolved Oxygen Cap Membrane Kit for Galvanic Sensors, YSI (CAT#: STEM-AIAE-0479-ZJF)

The 5913 Dissolved Oxygen Cap Membrane Kit for Galvanic Sensors is manufactured by YSI.
Six-pack of 1.25 mil PE membranes with yellow caps.
It is an accessory for the following products:
YSI Pro1020 pH / ORP & DO Meter

SKU: 605913
Equipment used with: Pro1020

1.25 mL PE, Polyethylene membranes
Yellow cap
Response Time (T95 - from 0 to 100%) = 8 seconds
Flow Dependence After 4 Minutes = 25%
Required Flow Rate = 6 inches/second
Includes bottle of NaCl electrolyte, 1 sanding disc, and 6 screw-on cap membranes

900 Chlorine Colorimeter, Chlorine Free: 0.02 to 2.0 mg/L, Chlorine Total: 0.1 to 8.0 mg/L, YSI
9300 Photometer, 100+ Parameters, YSI
EcoSense DO200A Dissolved Oxygen Meter, DO % Air Saturation: 0 to 200%, DO: 0 to 20 mg/L, Temperature: 0 to 50°C, YSI
EcoSense EC300A Conductivity Meter, YSI
EcoSense ODO200 Dissolved Oxygen Meter, DO % Air Saturation: 0 to 200%, DO: 0 to 20 mg/L, Temperature: 0 to 50°C, YSI
EcoSense pH1000A Benchtop pH Meter, -2.0 to 16.0 pH units, -1999.9 to 1999.9 mV, 0 to 100 °C, YSI
EcoSense pH100A Meter, pH: -2 to 16 units, mV/ORP: -1999 to +1999 mV, Temperature: -10 to +120°C, YSI
MultiLab 4010-1W Laboratory Instrument, YSI
pHotoFlex STD (Standard) Colorimeter, 85 Parameters, YSI
Pro10 pH Meter, pH: -2 to 14 units, Temperature: -5 to 55°C, ORP: -1500 to +1500 mV, YSI
TruLab pH 1110 Laboratory Instrument, 1 Channel, YSI