WIGGENS WH-01 Mini Low Temperature Incubator, Shinetek Instruments Research Institute (CAT#: STEM-CC-3490-LGZ)

The Peltier refrigeration system has less vibration, lower noise and less heat than ordinary compressor refrigeration methods, providing you with a high-level research environment.

Internal volume L: 15
Temperature range °C: +10~40 (20 °C ambient temperature)
Temperature accuracy °C (20 °C): 0.1
Temperature stability ℃ (37 ℃): 0.5
Temperature controller: film button, digital display PID automatic adjustment
Constant temperature method: Peltier refrigeration system, forced convection in the box
Material - liner: stainless steel;
Material-shell: steel plate, powder coating;
Material-Shelf: stainless steel wire electroplating polished treatment
Material - Insulation: Non-combustible polystyrene;
Material-Glass inner door: high temperature resistant Anquan glass (5mm)
Timer: Timing start, timing stop (Max.99hr59min, Min.1min)
Heating power W: 150
Power supply: AC230V, 50Hz, 1.8A
Net weight kg: 24
Loading capacity: Can accommodate 3 100ml Erlenmeyer flasks and 3 300ml Erlenmeyer flasks or 2 1000ml Erlenmeyer flasks at the same time
Box size (WxDxH)mm: 315x200x230
Dimensions (WxDxH)mm: 430x595x400

Digital temperature setting and display, PID stable control technology to ensure accurate temperature control and protection.
Stainless steel plate air jacket heater has good heating effect, anti-pollution and easy to clean.
It can store the 3 commonly used temperatures, and can be opened and used at any time when needed. The temperature unit can be selected from ℃, OF.
When the temperature exceeds the set value or reaches the set value of overheating protection, the overheating alarm light will flash and an alarm sound will be issued, and the power will be turned off at the same time to stop heating.
The inner door is made of high temperature resistant tempered glass, and the inner sample can be observed by opening the door.
Strong circulation of internal air, high temperature uniformity.
With automatic defrosting function, it will not freeze even if it is operated at low temperature for a long time.
The durable and environmentally friendly EPDM insulation material is used, which does not produce fine dust or harmful gases, and is not harmful to users and samples.
The magnetic gasket of the box door has the effect of shock absorption and double sealing to ensure the airtight effect of the incubator.
Stainless steel wire shelf: good ventilation, easy to clean, adjustable height.
Bias correction function when temperature deviation occurs, easy to operate.
Work option function when the power is restored after an unexpected power failure: There are two functions of automatic operation and automatic stop.
When the door is opened, the door indicator will light up and the fan and heater will stop, and an alarm will sound after one minute.
With overheat protection, overcurrent protection and other safety system.

WIGGENS WH-15 Constant Temperature Incubator, 150L, Shinetek Instruments Research Institute (CAT#-STEM-CC-3496-LGZ)
WIGGENS WH-02 Mini Low Temperature Incubator, Shinetek Instruments Research Institute (CAT#-STEM-CC-3491-LGZ)
WIGGENS WH-05 Constant Temperature Incubator, 50L, Shinetek Instruments Research Institute (CAT#-STEM-CC-3492-LGZ)
WIGGENS WH-10 Constant Temperature Incubator, 100L, Shinetek Instruments Research Institute (CAT#-STEM-CC-3493-LGZ)
WIGGENS WH-11C Low Temperature Biochemical Incubator, Shinetek Instruments Research Institute (CAT#-STEM-CC-3494-LGZ)
WIGGENS WH-1200 Constant Temperature Incubator, 1200L, Shinetek Instruments Research Institute (CAT#-STEM-CC-3495-LGZ)