Vertical Shaking Incubator MQL-61FR / MQL-61HR / MQL-61H, 10-300 rpm (CAT#: STEM-AL-6772-ZJF)

The Vertical Shaking Incubator MQL-61FR; MQL-61HR; MQL-61H is a temperature-controlled laboratory system for simultaneous incubation and orbital agitation. It supports programmable shaking across the stated speed range for microbial, cell, and biochemical culture workflows. The chamber and platform accommodate the vessel or microplate capacities specified for the configuration. Electronic temperature control regulates the chamber across the stated operating range where refrigeration or heating is provided. Forced-air circulation and the chamber design support uniform incubation conditions during extended runs. Digital controls allow users to set and monitor shaking speed, temperature, and run time. Safety functions such as overtemperature protection, door-open stopping, or power-loss recovery are provided where specified by the source. The instrument is suited to research, clinical, pharmaceutical, food, environmental, and general laboratory workflows requiring repeatable temperature-controlled agitation.

Model: MQL-61FR
MQL-61HR
MQL-61H
Shaking Speed: 10-300 rpm
Speed Accuracy: ±1 rpm
Orbit Diameter: 26 mm
Temperature Range: 4-60 °C
5-60 °C
Temperature Setting Accuracy: ±0.1 °C
Temperature Uniformity: ±0.8 °C at 37 °C
Display: LCD touchscreen
Convection: Forced-air convection
Control: PID microprocessor control
Maximum Capacity: Per level: 250ml x 25 or 500ml x 16 or 1000ml x 9 across two levels
Timer Range: 0-999.9 h
Platform Size: 485mm x 485mm
Standard Configuration: Universal clamps
Optional Configuration: Embedded printer
illumination
90 °Chigh-temperature module
pull-out static shelf
Power Supply: AC220±10%50-60Hz
Dimensions: 687 x 733 x 1229 mm
Weight: 185 kg

Touchscreen parameter control
Forced-air circulation
Servo motor drive
Overtemperature alarm
Power-loss recovery
Run data logging
USB data interface