TSKJ Series Cross-Type Steam Impurity Filter, 0.5-20 m³/min (CAT#: STEM-BC-2972-ZJF)

This cross-type stainless steel filter is designed for removal of particles and microorganisms from steam and compatible process gases. It can be configured for prefiltration, coarse filtration, fine filtration, or terminal sterilizing service. The polished housing accepts threaded, 222, or 226 cartridge connections. Glass-fiber and polypropylene elements can be used for particulate prefiltration. PVDF and PTFE pleated elements can be selected for microbial removal from compatible gases. Titanium, sintered stainless steel, or sintered PTFE elements can be installed for high-temperature steam service. A lower drainage section supports condensate removal during operation. Differential-pressure, safety, and drain accessories can be added for process monitoring and protection.

Model series: TSKJ
Models: TSKJ0105, TSKJ0110, TSKJ0120, TSKJ0310, TSKJ0320, and TSKJ0520
Design pressure: 0.8 to 1.0 MPa
Design temperature: 20 to 150°C
Housing materials: SUS304 and SUS316L
Seal types: O-ring and flat gasket
Connection options: Sanitary clamp and flange
Cartridge interfaces: Threaded, 222, and 226
Surface finish: Mirror polishing or electropolishing
Reference flows: 0.5, 2, 4, 5, 10, and 20 m³/min by model
Cartridge quantities: 1, 3, or 5
Cartridge lengths: 5, 10, or 20 in
Media options: GF, PP, PVDF, PTFE, titanium, sintered stainless steel, and stainless steel fiber felt
Terminal gas rating: 0.01 µm
Steam-filter rating: 1 µm

Cross-type condensate-draining design
Multiple cartridge quantities
Steam and compressed-gas compatibility
Broad filtration-media selection
Hygienic polished stainless steel
Multiple flow capacities
High-temperature element options
Pre- and terminal-filtration configurations

STEM-BC-0020-ZJF
STEM-BC-0021-ZJF
STEM-BC-0022-ZJF
STEM-BC-0023-ZJF
STEM-BC-0024-ZJF