Tritrichomonas Foetus (Fetal) Dye-Based qPCR Kit, 50 Tests/Box (CAT#: STEM-SLSR-0173-ZJF)

This kit utilizes SYBR Green dye-based real-time fluorescent PCR technology. Specific primers are designed to target highly conserved regions of the Tritrichomonas Foetus (Fetal) gene. In the presence of the target nucleic acid template, PCR amplification occurs, generating fluorescence signals. The fluorescence intensity is monitored in real time, enabling qualitative and quantitative analysis of Tritrichomonas Foetus (Fetal) with high sensitivity and specificity.

Kit Components:
Tritrichomonas Foetus (Fetal) Amplification Mix: 50 µL × 1 tube
Tritrichomonas Foetus (Fetal) Reaction Mix: 950 µL × 1 tube
Tritrichomonas Foetus (Fetal) Positive Control: 50 µL × 1 tube
Tritrichomonas Foetus (Fetal) Negative Control: 50 µL × 1 tube
Instruction Manual: 1 copy
Note 1: Components from different lot numbers must not be used interchangeably.
Note 2: The kit components are sufficient for the number of tests specified on the label.
Storage Conditions and Shelf Life:
-20°C ± 5°C, protect from light; avoid repeated freeze-thaw cycles (less than 7 times); shelf life is 12 months.
Applicable Instruments:
1.5 mL DNase/RNase-free centrifuge tubes
0.2 mL PCR reaction tubes
Filter tips (specifications: 10 µL, 200 µL, 1000 µL)
Centrifuge, vortex mixer, micropipettes of various specifications
Agarose, electrophoresis tank, power supply, gel imaging system
Sample Requirements:
Acceptable sample types include food, feces, vomit, oral samples, saliva, nasal/throat/eye/anal swabs, and virus cultures.
Cross-contamination should be avoided. Samples should be tested immediately after collection or stored at -20°C ± 5°C. For long-term storage, keep below -70°C.
Sample Storage and Transport:
Samples can be stored short-term at -20°C.
For long-term storage, keep below -70°C (no longer than 6 months).
During transportation, use 2-8°C ice packs. Repeated freeze-thawing is strictly prohibited.

Simplified protocol: only DNA needs to be added.
High-precision primers designed for analyte-specific detection.
Reagents optimized for robust signal sensitivity.
Positive control supports result validation and QC.
Fully enclosed PCR setup mitigates contamination risks.
Limited to academic or laboratory research.

STEM-SLSR-0171-ZJF
STEM-SLSR-0172-ZJF
STEM-SLSR-0174-ZJF
STEM-SLSR-0175-ZJF