Three-Level Small-Capacity Shaking Incubator MQD-S3HR, 10-350 rpm (CAT#: STEM-AL-6767-ZJF)

The Three-Level Small-Capacity Shaking Incubator MQD-S3HR is a temperature-controlled laboratory system for simultaneous incubation and orbital agitation. It supports programmable shaking across the stated speed range for microbial, cell, and biochemical culture workflows. The chamber and platform accommodate the vessel or microplate capacities specified for the configuration. Electronic temperature control regulates the chamber across the stated operating range where refrigeration or heating is provided. Forced-air circulation and the chamber design support uniform incubation conditions during extended runs. Digital controls allow users to set and monitor shaking speed, temperature, and run time. Safety functions such as overtemperature protection, door-open stopping, or power-loss recovery are provided where specified by the source. The instrument is suited to research, clinical, pharmaceutical, food, environmental, and general laboratory workflows requiring repeatable temperature-controlled agitation.

Model: MQD-S3HR
Shaking Speed: 10-350 rpm
Speed Accuracy: ±1 rpm
Orbit Diameter: 26 mm
Temperature Range: 4-60 °C
Temperature Setting Accuracy: ±0.1 °C
Temperature Uniformity: ±0.5 °C at 37 °C
Display: LCD touchscreen
Convection: Forced-air convection
Control: PLC microprocessor control
Maximum Capacity: Per level: 250ml x 30 or 500ml x 20 or 1000ml x 12 or 2000ml x 6 or 3L x 5
Timer Range: 0-999.9 h
Platform Size: Per level: 524mm x 412mm
Standard Configuration: Universal clamps (fixed clampsoptional)
Power Supply: AC220±10%50-60Hz
Dimensions: 899 x 712 x 1799 mm
Weight: 349 kg

Independent level control
Touchscreen parameter control
Forced-air circulation
Servo motor drive
Overtemperature alarm
Power-loss recovery
Door-open stop protection