The Thermo Neslab ThermoFlex 2500 Chiller is manufactured by Thermo Fisher Scientific. The Thermo Scientific Neslab ThermoFlex 2500 recirculating chillers are designed to provide a continuous supply of fluid at a constant temperature and volume. This unit is WATER COOLED and also offers a refrigeration system, heat exchanger, recirculating pump, polyethylene reservoir, and a microprocessor controller. The pre-owned products will be thoroughly cleaned and fully tested to perform at manufacturer specifications before shipping.
Specification
Condition: Certified Pre-Owned Electrical: 208-230VAC, 50/60Hz, 24 Amps Refrigerant: R134a, 29 oz. Design Pressure: 200-348 PSI Operating Range: 0 to 40°C Control Accuracy: ±1.0°C Cooling Capacity at 20°C: 3385W/11,543BTU/Hr. Flow Rate: 40L/Min. Max Discharge Pressure: 3.5bar/51psi. Filling Volume: 245-Liters
Features
Turbine T1 pump – 3.5gpm at 60 psig 2500W (8538 BTU) cooling capacity at 20°C Voltage requirement: 208-230 VAC/60Hz, SINGLE PHASE Set Point Temperature Range: +5°C to +40°C Ambient Temperature Range: +10°C to +40°C 7.2 liter (1.9 gallon) Reservoir Volume Water Cooled Condenser uses facility water to remove application heat Pressure relief valve that allows the user to set the maximum fluid pressure to meet application requirements (available as an internal or external component) Flow Readout allows for monitoring the flow rate via controller readout Auto Refill allows for automatic refilling from a customer supplied water source to ensure fluid level is maintained Anti-Drainback prevents fluid from flowing back to the reservoir when the chiller is installed below the application Partial flow internal DI cartridge minimizing footprint and proving fluid resistivity between 1 & 3 m0hm SEMI S2 Compliant – S2-0703, S8-0705, S14-0704 & F47-0706