Thermo Forma 3010 CO2 Water Jacketed Incubator, Thermo Fisher Scientific (CAT#: STEM-CC-2151-LGZ)

The manufacturer of Thermo Forma 3010 CO2 Water Jacketed Incubator is Thermo Fisher Scientific. Model is 3010. The Thermo Scientific water-jacketed CO2 incubator is surrounded by an insulated three-wall cabinet structure and jacket of temperature-regulated water to protect your culture. This provides unparalleled protection as unnecessary heat loss is prevented, even in the event of a power outage. These incubators are ideal for laboratories exposing their cultures to potential power outages or significant fluctuations in ambient temperature.

Condition: used
6.5 cu ft capacity
Stainless steel Chamber
TC CO2 Sensor

1. Unique three-wall structure, the fluctuation of ambient temperature is prevented.
2. Patented, heated double panes, inner glass door to reduce condensation water, reaction capacity is improved and temperature recovery is faster.
3. Appearance is 18 gauge, cold rolled steel with high impact paint finish.
4. The stainless steel cavity is seamless, non-corrosive, type 304, mirror-finished, and cleaning is very easy.
5. The reservoir is removable: produces a relative humidity value up to 95%, a fast recovery rate, and promotes optimal cell growth.
6. High and low alarms can be set to maintain certain correct temperatures.
7. With four stainless steel perforated shelves, it can be easily installed and removed without tools.
8. Remote alarm contacts include connection to the internal alarm system.
9. Stacking kit includes dual stacking configuration.
10. Polished stainless steel interior, 100% rounded corners, cleaning is easy, time is saved, and the risk of contamination is reduced.
11. The sturdy stainless steel shelves and brackets can be easily disassembled without tools, and are convenient for cleaning, autoclaving, or adjustment.
12. The patented inner door gasket is removable, cleanable, and continuously adjusted to ensure a tight seal.
13. The optional indoor HEPA filter snap fit makes it easy to remove without tools.
14. Carbon dioxide range 0-20%.
15. Control accuracy: better than ±0.1%.
16. Sensor: long-life thermal conductivity (TC) sensor.
17. Readability and settability: 0.10%.
18. Inlet pressure requirement: 15 PSIG (1.0 bar).
19. Fill Port: 3/8 inch hose (barbed).
20. Drain: 1/4 inch hose (barbed).
21. Access port: 1.3 inches (3.3 cm) with removable silicone plug and filter.
22. CO2 inlet: 1/4 inch hose (barbed).

Fisher Scientific 11-690- 550D Incubator, Thermo Fisher Scientific(CAT#-STEM-CC-0368-LGZ)
VWR 12621-104 Dry Bath Incubator, Avantor(CAT#-STEM-CC-0369-LGZ)
VWR 12621-108 Dry Bath Incubator, Avantor(CAT#-STEM-CC-0370-LGZ)
Forma 3940 Microbiological Incubators Environmental Chambers, Thermo Fisher Scientific(CAT#-STEM-CC-0379-LGZ)
Being Instruments BIF-120 Convection Incubator, Being Instruments(CAT#-STEM-CC-0401-LGZ)
Being Instruments BIF-16 Convection Incubator, Being Instruments(CAT#-STEM-CC-0402-LGZ)