Protean IEF Cell System, Bio-Rad (CAT#: STEM-EPO-0060-ZJF)

The manufacturer of the Protean IEF Cell System, Bio-Rad is Bio-Rad.
The Bio Rad PROTEAN IEF Cell System is designed to perform the first dimension isoelectric focusing of two dimensional electrophoretic protein analysis. Featuring a pettier temperature controlled focusing platform, the IEF Cell System accommodates up to twenty-four 7 cm or twelve 17 cm strips for simultaneous isoelectric focusing.

Condition: Refurbished, Certified Pre-owned
Input Power: 90-264 VAC, 47-63 Hz
Fuse : 10A, 250 V, SLO-BLOW, 3AB Ceramic Body 3-wire; grounded
Input power cord : 3-wire; grounded
Power Ouputs- Voltage : 50-10,000 V, 1 V increments
Power Ouputs- Current: 0-2.4 mA, 0.01 μA increments
Power Ouputs- Power: 0-24 Watts
Time: 00: 01-99: 00 hours: minutes or 0-99,999 volt-hours
Focusing trays- Material: Poly carbonate
Focusing trays- Strip size: 7, 17 cm
Focusing trays- Capacity : 12 strips per tray
Electrode Distance: 7cm - 64.5 mm; 17 cm- 162 mm
Accommodates total strip length: 7cm – 82.3 mm; 17 cm- 181 mm
Capacity : 12 Strips per tray
Accommodates total strip length: 80 mm for 7 cm tray, 186 mm for 17 cm tray
Optional: Bio-Silect SEC-400 Guard 50X 7.8mm (p/n 295319), Bio-Silect SEC 250-5 Column 300X7.8mm (p/n 403453), Bio-Silect SEC 250 Guard 50X 7.8mm (p/n 418040), Bio-rad Powerpac 3000 power supply (p/n 165-5056) & Bio-Rad PowerPac 1000.

Peltier Temperature controlled focusing platform
Maximum Voltage of 10,000 V
Set voltage and voltage ramping profile in each step
Time or Volt hour control in each step
Integral or separate rehydration step
Programmable current limit
Simultaneous focusing of twenty-four 7 cm strips, or twelve 17 cm IPG strips
Three pre-programmed (pre-set) methods
Ten user-defined methods
Run data collection via RS 232 port and optional Thermal Printer

Prism 3100 Parts, Applied Biosystems
PTC 200 Peltier Thermal Cycler, MJ Research
PTC 225 Tetrad Peltier Gradient Thermal Cycler, MJ Research