Programmed LED illumination incubator, 3700W, Working Chamber Size 840×800×1100 mm, Dimensions 1150×1085×1860 mm, Shanghai Jing Hong Laboratory Instrument Co., Ltd (CAT#: STEM-GLE-0145-LGH)

LED illumination incubator, GZP-750S, Shanghai Jing Hong Laboratory Instrument Co.,Ltd
1. The mirror stainless steel inner tank, four corners of the semi-arc transition, partition bracket can be free loading and unloading, easy to clean the box.
2. Double door structure, good heat insulation performance. The inner door adopts full-toughened glass door. Open the outer door to observe the situation in the box without affecting the temperature in the box.
3. Microcomputer program control temperature, illuminance, can simulate the daytime and night temperature and illuminance changes.
4. With overtemperature alarm system, over the set temperature will send sound and light alarm and cut off the heating system, to ensure the safe operation of equipment.
5. New fluorine free design, advanced LED light source lighting, high efficiency, energy saving, promote emission reduction.
6. Program controlled lighting incubator (S-type) with 30 segments programmable temperature controller, can set up a maximum of 30 segments of temperature change, with
7. Artificial climate box is a set of temperature, humidity, illumination control and one. 30 section programmable controller can simulate natural climate to the maximum extent.
8. Change optional USB data export interface.

Power supply voltage: AC 380V，50HZ
Temperature control range (℃): no light：0～50℃，light：10～50℃
Temperature resolution: ±1℃
Consumed power: 3700W
Illuminance: ≥42000 Lux
Volume: 750L
Working chamber size (mm): 840×800×1100
Dimensions (mm): 1150×1085×1860
Carrier bracket (standard): 2

Microcomputer program to control temperature and illuminance, can simulate daytime and night temperature and illuminance changes
With a 30-segment programmable temperature controller, maximum 30-segment temperature change can be set