Porcine-Derived Clostridium Difficile Dye-Based qPCR Kit, 50 Tests/Box (CAT#: STEM-SLSR-0983-ZJF)

This assay kit applies SYBR Green dye-based real-time PCR to amplify and detect Porcine-Derived Clostridium Difficile nucleic acids. Specific primers are designed to target conserved regions of the target gene. Fluorescence signals emitted during amplification are recorded in real time, supporting accurate identification and measurement of Porcine-Derived Clostridium Difficile in experimental and routine laboratory settings.

Kit Components:
Porcine-Derived Clostridium Difficile Amplification Mix: 50 µL × 1 tube
Porcine-Derived Clostridium Difficile Reaction Mix: 950 µL × 1 tube
Porcine-Derived Clostridium Difficile Positive Control: 50 µL × 1 tube
Porcine-Derived Clostridium Difficile Negative Control: 50 µL × 1 tube
Instruction Manual: 1 copy
Note 1: Components from different lot numbers must not be used interchangeably.
Note 2: The kit components are sufficient for the number of tests specified on the label.
Storage Conditions and Shelf Life:
-20°C ± 5°C, protect from light; avoid repeated freeze-thaw cycles (less than 7 times); shelf life is 12 months.
Applicable Instruments:
1.5 mL DNase/RNase-free centrifuge tubes
0.2 mL PCR reaction tubes
Filter tips (specifications: 10 µL, 200 µL, 1000 µL)
Centrifuge, vortex mixer, micropipettes of various specifications
Agarose, electrophoresis tank, power supply, gel imaging system
Sample Requirements:
Acceptable sample types include food, feces, vomit, oral samples, saliva, nasal/throat/eye/anal swabs, and virus cultures.
Cross-contamination should be avoided. Samples should be tested immediately after collection or stored at -20°C ± 5°C. For long-term storage, keep below -70°C.
Sample Storage and Transport:
Samples can be stored short-term at -20°C.
For long-term storage, keep below -70°C (no longer than 6 months).
During transportation, use 2-8°C ice packs. Repeated freeze-thawing is strictly prohibited.

Simplified protocol: only DNA needs to be added.
High-precision primers designed for analyte-specific detection.
Reagents optimized for robust signal sensitivity.
Positive control supports result validation and QC.
Fully enclosed PCR setup mitigates contamination risks.
Limited to academic or laboratory research.

STEM-SLSR-0981-ZJF
STEM-SLSR-0982-ZJF
STEM-SLSR-0984-ZJF
STEM-SLSR-0985-ZJF