P-2000 Laser Based Micropipette Puller, Sutter Instrument (CAT#: STEM-LE-1326-LC)

Exterior Dimensions:30 x 14.25 x 13.25 in (76 x 36 x 33.5 cm)
Type:Horizontal
Heat Source:CO2 Laser
Input Range (Diameter):Typically up to 1.2 mm (depending on model)
Tip Size (Output):less than 0.03µm
Types of Glass:Quartz Glass, Conventional Glasses

Capable of pulling quartz, borosilicate and aluminosilicate glass.
Fully programmable-including heating wire characteristics.
Lasers do not have the melting point limit of conventional wire; therefore, they cannot be burned out.
Pull the electrode with an electrode diameter less than 0.03µm.
Optimized speed sensing circuit can achieve maximum sensitivity and reproducibility.
Under normal use, the service life of the CO2 laser is expected to exceed ten years, after which, Sutter Instruments can refurbish it and charge a fee.
Individual programs can be write-protected to prevent accidental changes.
Shows the total heating time during pulling to improve program development and troubleshooting.
Display the date and time stamp to show when the program was last changed.
P-2000/F is ideal for applications such as nano-spraying and NSOM.
Pre-programmed sample programs for intracellular and patch pipettes. Special programming is available on request.

P-1000 Next Generation Micropipette Puller (Flaming/Brown Style), P-30 Vertical Micropipette Puller, P-97 Flaming/Brown Micropipette Puller