Napco 6500 CO2 Incubator, Thermo Fisher Scientific (CAT#: STEM-CC-2165-LGZ)

The manufacturer of Napco 6500 CO2 Incubator is Thermo Fisher Scientific. Model is Napco 6500. Designed to provide a clean room, the shelves are removable and have unique beveled corners for easy decontamination. Continuous cavity circulation through high efficiency filters. 3-digit LED displays temperature and carbon dioxide. Microprocessor PID temperature control, over temperature protection. Large 20-gallon water jacket.

Condition: used
Temperature Range: 18 °C to 50 °C
CO2 Range: 0 - 20%
CO2 Control: 0.1%
CO2 Uniformity: ±0.25%
Humidity Range: Ambient to 98%
Capacity: 5.1 cu. ft (145.5 L)
Overall Dimensions (W x H x D): 29.6” x 23.5” x 35.5” (75 x 59.5 x 92 cm)
Weight: 231.5 lbs. (105 kg)
Electrical: 120 V, 800 W, 6.7 amps

1. There are no sensors, fans or ducts in the room.
2. Thermal conductivity (TC) and infrared (IR) sensors are available. Infrared systems are not affected by indoor moisture. The sensor is housed in a compartment in the water jacket. This location provides a stable environment for the most precise temperature and CO2 measurement and control.

Eppendorf CellXpert C170i CO2 Incubator, Eppendorf(CAT#-STEM-CC-0419-LGZ)
Fisher Scientific Single Heat Block Dry Bath Incubator, Thermo Fisher Scientific(CAT#-STEM-CC-0495-LGZ)
Eppendorf Thermomixer C Thermomixer, Eppendorf(CAT#-STEM-CC-0501-LGZ)
Eppendorf ThermoStat C Thermomixer, Eppendorf(CAT#-STEM-CC-0502-LGZ)
Baker INC001 CO2 Incubator, Baker(CAT#-STEM-CC-0903-LGZ)
Fisher Scientific 230D Incubator, Thermo Fisher Scientific(CAT#-STEM-CC-1159-LGZ)