Mold Incubator MJ, 0～60℃, 503×370×808 mm, LCD, Shanghai Yiheng Scientific Instruments Co., Ltd (CAT#: STEM-CC-0017-YJL)

Mold Incubator MJ, 0～60℃, 503×370×808 mm, LCD, model MJ-150F-ǀ is manufactured by Shanghai Yiheng Scientific Instruments Co., Ltd. IIn line with the trend of environmental protection in the world, the compressors and circulating fans of international brands have high efficiency and low energy consumption, which not only promotes energy saving, but also has a long service life, which can reduce noise to a minimum. Compared with traditional low-temperature equipment, the cooling time is reduced by more than 40%. .

Temperature Range: 0～60℃
Temperature Resolution: 0.1℃
Temperature Stability: HIGH±0.5℃ LOW±1.0℃
Temperature Uniformity: ±1.5℃(Test Point: 25℃)
Humidity Control Range: none
Humidity Deviation: none
Voltage: AC220V 50HZ
Working Temperature: +5～30℃
Input Power: 500W
Interior Dimension(W×H×D)(mm): 503×370×808
Dimensions(mm): 600×630×1360
Shelves(Standard): 3pcs
Timing: 0~9999min
Remarks: In addition to the characteristics of type I, type II mold incubator also has microcomputer control humidity.

● Adopt mirror stainless steel liner, semi-circular arc design at four corners, easy to clean, adjustable shelf space in the box.
● International brand compressor, using environmentally friendly refrigerant (R134a), high efficiency, low energy consumption, and promote energy saving.
● Microcomputer PID temperature controller, accurate and reliable temperature control, less fluctuation, with timing function.
●Three-speed control of circulating fan speed, which avoids volatilization of samples due to excessive air volume during the test.
● Equipped with an independent temperature limit alarm system, it will be automatically interrupted when the temperature exceeds the limit to ensure the safe operation of the experiment without accidents. (optional)
● With printer or RS485 interface, it can be connected to printer and computer, and can record the changes of temperature parameters. (optional)
● LCD screen display, menu operation. (Models with "F" and "Ⅱ" in the model have this function)

Mold Incubator BPMJ(CAT#: STEM-CC-0028-YJL)
Mold Incubator BPMJ(CAT#: STEM-CC-0029-YJL)