MJ Research PTC-200 Thermal Cycler, 12 x 12 x 12 in, Bio-Rad Laboratories, Inc. (CAT#: STEM-PCREPO-0001-YJL)

MJ Research PTC-200 Thermal Cycler, 12 x 12 x 12 in, model PTC-200, is manufactured by Bio-Rad Laboratories, Inc. . The MJ Research PTC-200 DNA Engine, also now called the Bio-Rad PTC 200 is a reliable peltier thermocycler that boasts of a polished and robust design. The Hot Bonnet heated lid fitted into the PTC 200 Thermo Cycler controls pressure and height. As a result, various plastic wares can be accommodated by the PTC-200 system. This feature enables oil-free cycling as well. The Peltier-effect heat pumps of the system facilitate repeated cycling using the PTC-200 thermal cycler.
MJ Research PTC-200 thermal cyclers are equipped with interchangeable sample blocks and heat pump assemblies which allow users to easily change formats in between runs while maintaining NIST-traceable accuracy. Single control units of this model can also be supplied with different alpha modules and alpha blocks to increase functionality. Users can achieve thermal control with this instrument by using either a block-in sample probe or calculated methods. Block controls enhance compatibility with protocols while calculated sample temperature controls highly boost speed and accuracy.
Possible MJ Research PTC-200 Supplements
Alpha modules:
dual- independently controlled blocks
microplate format
slide adapter (for up to 16 slides)
Alpha blocks:
96-well block
Dual 48-well block (to run two programs simultaneously)
384 well block

Condition: Certified Pre-Owned
GENERAL
Thermal range: -5 to 105C. but no more than 30C below ambient temperature (4 to 100C for the Slide Chambers Alpha unit)
Thermal Accuracy: – or + 0.3C of programmed target at 90C- NIST-traceable
Thermal uniformity: – or + 0.4C well-to-well within 30 seconds of arrival at 90C (for most Alpha units; see specifications for individual Alpha units)
INPUT/OUTPUT
Parallel: One 25-pin 8-bit parallel interface printer port
Serial: One 9-pin RS-232 serial port for printer or remote use
IEEE: One IEEE-488 bidirectional general purpose interface bus
Display: One 20 x 4 LCD alphanumeric display
DIMENSIONS
W x L x H: 12 in. x 12 in. x 12 in.
Weight: 25lbs
MISCELLANEOUS
Ramping speed: up to 3℃/sec in models that hold 0.2ml tubes or V-well plates
Capacity: Varies with installed Alpha unit
Temperature homogeneity: 0.4℃ within 30 seconds of arrival @ 60℃ for all standard models.
Line Voltage: DNA Engine® cycler: 100–240 VAC rms (no adjustment needed among voltages within these ranges)
Frequency: 50–60 Hz single phase
Power: DNA Engine cycler: 850 W maximum
Fuses: Two 6.3 A, 250 V, 5 x 20 mm
Gradient Specification (96V Aplha module only)
Accuracy: +0.3℃ of programmed target at end columns, 30 seconds after the timer starts for the gradient step, NIST–traceable
Column uniformity: +0.4℃, well–to–well within column, within 30 seconds of reaching target temperature
Gradient calculator accuracy: +0.4℃ of actual well temperature
Lowest programmable temperature: 30℃
Highest programmable temperature: 105℃

Guaranteed to meet Original Equipment Manufacturer specifications
Equipped with ports for RS232, IEEE-488 and parallel printer types
Compatible with several Alpha modules and blocks
Need more capacity? What about a quad block MJ Research PTC-225 Tetrad?
Call TODAY to configure your next MJ Research PTC-200

MJ Research Alpha Slide ALD-0211 Thermal Cycler, Bio-Rad Laboratories, Inc. (CAT#: STEM-PCREPO-0021-YJL)
MJ Research Dyad Dual 96-Well Thermal Cycler, –5.0 - 105℃, Bio-Rad Laboratories, Inc. (CAT#: STEM-PCREPO-0022-YJL)
MJ Research PTC-100 Thermal Cycler, 0–100℃, Bio-Rad Laboratories, Inc. (CAT#: STEM-PCREPO-0023-YJL)
MJ Research PTC-150 MiniCycler, -9 - 105˚C, Bio-Rad Laboratories, Inc. (CAT#: STEM-PCREPO-0024-YJL)
MJ Research Tetrad PTC-225 Thermal Cycler, -5 - 105°C, Bio-Rad Laboratories, Inc. (CAT#: STEM-PCREPO-0025-YJL)
Perkin Elmer PE 9700 Thermal Cycler, 4.0 - 99.9℃, Perkin Elmer (CAT#: STEM-PCREPO-0026-YJL)