MJ Research PTC-100 Thermal Cycler, 0–100℃, Bio-Rad Laboratories, Inc. (CAT#: STEM-PCREPO-0023-YJL)

MJ Research PTC-100 Thermal Cycler, 0–100℃, model PTC-100, is manufactured by Bio-Rad Laboratories, Inc. . The MJ Research PTC-100 is a robust thermocycler that provides solutions for various temperature configuration needs. This instrument comes in versions that use of 96-well or 60-well microplates, as well as a heated lid for oil-free operation. The Hot Bonnet heated lid fitted in each unit has a thumbwheel that allows for the convenient adjustment of height and pressure. The modification feature ensures the tight sealing of reaction vessels ¬and microplates during oil-free thermal cycling.
The Precise Peltier-effect heat pumps of PTC-100 thermocyclers were crafted to withstand repeated cycling. Any temperature sequence can be cycled up to 10,000 times. The NIST-traceable calibration feature of this instrument allows for the indefinite storing of material at any temperature. As a result, incubation rates are highly accurate. This calibration feature is also responsible for the refrigeration of results after unsupervised runs.
Data storage is secured and hassle-free with MJ Research PTC-100 thermocyclers. Memory stores approximately 320 programs, and the cycler comes with 14 pre-programmed protocols. Any sequence of temperatures can be cycled up to 10,000 times. Ramping rates less than maximum can also be specified. Data which were not properly stored due to power interruptions are safe for up to twelve hours with the PTC-100’s power-failure protection feature.

Condition: Certified Pre-Owned
Thermal range: 0–100℃ electronically (with Peltier-effect heat pumps)
Accuracy: ±0.5℃ of programmed target at 60℃
Thermal homogeneity: ±0.4℃ well to well within 30 seconds of arrival at 60℃
16MS slide block: ±0.4℃ within 30 seconds of arrival at 90℃
RAMPING RATE
60-well block: up to 1℃/sec
96-well: up to 1.2℃/sec
96AgV gold/silver block: up to 2.5℃/sec
16MS Slide Block: up to 0.5℃/sec
SAMPLE CAPACITY
Dimensions (H x W x D): 45 in. x 30 in. x 39 in.
60-well block: Sixty x 0.5ml tubes
96-well block, 96AgV gold/silver block: 96 x 0.2ml tubes or one 96-well plate
16MS Slide Block: Sixteen 25 x 75mm slides and 24 x 0.2ml tubes
Line voltage: 100–240VAC rms (no adjustment needed among voltages within these ranges)
Frequency: 350W maximum (momentary 4.5 A)
Fuses: Two 4A, 5 x 20mm (4 ampere)
Displays: One 2 x 16 LCD alphanumeric display
Ports: One 25-pin 8-bit parallel interface printer port

Hot Bonnet heated lid
NIST-traceable calibration
Produce highly accurate incubations
Parallel printer port
Power-failure protection
Fitted with Peltier-effect heat pumps
14 pre-programmed protocols

Eppendorf Mastercycler Nexus Thermal Cycler, Aluminum, Eppendorf (CAT#: STEM-PCREPO-0016-YJL)
Eppendorf Mastercycler Pro Thermal Cycler, Aluminum, Over 12 columns, Eppendorf (CAT#: STEM-PCREPO-0017-YJL)
Eppendorf Mastercycler Pro Thermal Cycler, Silver, Eppendorf (CAT#: STEM-PCREPO-0018-YJL)
Eppendorf Mastercycler Pro Thermal Cycler, Aluminum, Over 24 columns, Eppendorf (CAT#: STEM-PCREPO-0019-YJL)
Eppendorf Mastercycler Thermal Cycler, Eppendorf (CAT#: STEM-PCREPO-0020-YJL)