Millipore Milli-Q Gradient A10 Water Purification System, Millipore (CAT#: STEM-GLEPO-1275-ZJF)

The manufacturer of the Millipore Milli-Q Gradient A10 Water Purification System is Millipore.
The pre-owned products will be thoroughly cleaned and fully tested to perform at manufacturer specifications before shipping.

Condition: Certified Pre-Owned
Electrical: 120V, 60Hz, 100VA

Water quality parameters:
Resistivity Measurement Range: 2.4 – 18.2 MΩ.cm (compensated to a 25°C value)
Conductivity Measurement Range: 0.055 – 0.294 μS/cm
Temperature Measurement Range: 0 – 45°C (not the system temperature operating range)
TOC Measurement Range: 1 – 999 ppb

Specifications:
Water: Type 1
Noise level: 42 dB
Flowrate: up to 1.2 liter/minute
TOC: Max ppb
Pyrogens: <0.001 Eu/ml
Resisitivity: 18.2 MΩ·cm
Humidity: 50% - 80% without condensation
Ambient operating temperature: 5°C< T< 25°C
Ambient storage temperature: 5°C< T< 40°C

Feedwater Requirements:
Feedwater conductivity < 100µS/cm @25°C
Feedwater temperature: 5° to 35°C
Feedwater flowrate: ≥ 1.5 liters/minute
Minimum feedwater pressure: ≥ 0.0 bar
Maximum feedwater pressure: ≤ 0.3 bar

Physical:
Dimensions: 11.65" W 17.51" H x 13.22" D (29.6 w x 44.5 h x 33.6 cm)
Weight: 35.27 lbs (16 kg)
Power: 120 VAC ± 10%, 50/60 Hz, 60 VA, 0.5 amp source, 2 amp Time Lag fuse; 230 VAC ± 10%, 50/60 Hz, 0.26 amp source, 1 amp Time Lag fuse

Pure and continuous source of water
In excellent condition
Thoroughly cleaned
Fully tested to perform at manufacturer specifications

Millipore Elix 10 Water Purification System, Millipore
Barnstead NANOpure DIamond Ultrapure Water System, Barnstead International
ELGA Veolia Purification Packs, ELGA LabWater
Labconco Water Pro Reverse Osmosis Work Station, Labconco Corporation