MFC-2000 Z-Axis Drive and Controller, 6" D x 9" W x 3" H, Applied Scientific Instrumentation (CAT#: STEM-LE-1608-Y)

The MFC-2000 Z-Axis Drive and Controller is manufactured by Applied Scientific Instrumentation. The precise control of the microscope focus is achieved by using a closed-loop DC servo motor that uses a high-resolution encoder for position feedback.

Maximum speed of Z axis: 0.6mm / sec
Z axis resolution: 0.05μm
Z-axis repeatability: ±0.1μm

The backlit LCD display shows the Z coordinate.
An ergonomic compact desktop control unit.
Closed loop DC servo control of z-axis.
Utilize ASI's proven Z-axis drive.
The Z-axis clutch can easily switch between manual and electric focus control.
The "Zero" and "Home" buttons can realize simple independent operation.
Microprocessor control via RS232-C serial communication.
USB serial computer interface.

LS-100 Linear Stage, 1.9 kg Weight, Applied Scientific Instrumentation (STEM-LE-1591-Y)
MS-2000 Low Mass XY Stage, 6 "D x 9 "W x 3 "H, Applied Scientific Instrumentation (STEM-LE-1595-Y)