LCS-MIC-80 Mold Incubator, 80 L and 0-70°C (CAT#: STEM-BC-3963-ZJF)

The LCS-MIC-80 is a heating and cooling incubator designed for mold and microbiological culture. It maintains samples at temperatures above or below ambient conditions for cultivation or storage. PID control provides precise temperature regulation with limited fluctuation. A 5-inch LCD displays the set temperature, actual temperature, cycle, time, and program segment. The controller supports thirty programmable segments and ninety-nine operating cycles. The 304 stainless-steel chamber is corrosion-resistant, easy to clean, and fitted with removable shelves. An ultraviolet lamp supports chamber disinfection and helps reduce microbial cross-contamination. A 42 mm side access port allows an external sensor to monitor the internal temperature. The chamber also includes a 10 A waterproof socket for compatible small instruments and extended procedures such as shaking culture.

Power supply: AC 220 V, 50 Hz
Rated power: 600 W
Calculated capacity: 80 L
Chamber dimensions: 400 × 400 × 500 mm
Chamber material: 304 stainless steel
Temperature range: 0-70°C
Temperature display resolution: 0.1°C
Temperature uniformity: ±0.5°C at 37°C and 22°C ambient
Temperature fluctuation: ±0.5°C at 37°C and 22°C ambient
Continuous operation: Long-term above 18°C, intermittent defrosting required below 18°C
Timer range: 0-9999 min or h
Program control: 30 segments and 99 cycles
Sterilization: Ultraviolet lamp
Shelf material: 201 stainless steel
Standard shelves: 2
Maximum shelves: 4
Maximum shelf load: 15 kg
Side access port: 42 mm
Internal socket: 10 A
Net weight: 80 kg
Product dimensions: 660 × 640 × 1165 mm

Heating and cooling operation
PID temperature control
Five-inch LCD display
Thirty-segment programming
Ultraviolet chamber sterilization
Removable stainless-steel shelves
External sensor access port
Waterproof internal socket

STEM-BC-0388-ZJF
STEM-BC-0389-ZJF
STEM-BC-0390-ZJF
STEM-BC-0391-ZJF
STEM-BC-0392-ZJF