LCS-MIC-600 Mold Incubator, 600 L and 2800 W (CAT#: STEM-BC-3968-ZJF)

The LCS-MIC-600 is the largest mold incubator in the listed series. Its 600 L chamber supports high-volume microbial cultivation and temperature-controlled sample storage. The system provides both heating and cooling for operation above or below ambient conditions. PID regulation maintains accurate temperature control with limited fluctuation and variation. A 5-inch LCD shows temperature, time, cycle, and program-stage information. Thirty programmable segments and ninety-nine cycles support complex incubation procedures. The 304 stainless-steel chamber and ultraviolet sterilization lamp provide a durable and disinfectable workspace. Removable shelves, a 42 mm test port, and a waterproof socket support flexible experimental configurations. The unit requires connection through a suitable circuit breaker as specified for the 600 L model.

Power supply: AC 220 V, 50 Hz
Electrical connection: External circuit breaker required
Rated power: 2800 W
Calculated capacity: 600 L
Chamber dimensions: 680 × 800 × 1100 mm
Chamber material: 304 stainless steel
Temperature range: 0-70°C
Temperature display resolution: 0.1°C
Temperature uniformity: ±0.5°C at 37°C and 22°C ambient
Temperature fluctuation: ±0.5°C at 37°C and 22°C ambient
Continuous operation: Long-term above 18°C, intermittent defrosting required below 18°C
Timer range: 0-9999 min or h
Program control: 30 segments and 99 cycles
Sterilization: Ultraviolet lamp
Shelf material: 201 stainless steel
Standard shelves: 2
Maximum shelves: 8
Maximum shelf load: 15 kg
Side access port: 42 mm
Internal socket: 10 A
Net weight: 204 kg
Product dimensions: 955 × 1040 × 1760 mm

Six-hundred-liter maximum capacity
High-power 2800 W operation
Wide 800 mm chamber
Heating and refrigeration functions
Programmable multi-cycle control
UV contamination reduction
Expandable shelf arrangement
Dedicated circuit-breaker connection

STEM-BC-0388-ZJF
STEM-BC-0389-ZJF
STEM-BC-0390-ZJF
STEM-BC-0391-ZJF
STEM-BC-0392-ZJF