LCS-MIC-350 Mold Incubator, 350 L and 1200 W (CAT#: STEM-BC-3966-ZJF)

The LCS-MIC-350 is a large mold incubator for controlled microbiological cultivation and preservation. It can maintain chamber temperatures above or below the surrounding environment. PID control supports precise and stable thermal conditions throughout extended processes. The 5-inch LCD presents programmed temperature, measured temperature, cycle count, time, and current segment. Thirty programmable stages and ninety-nine cycles allow automated multi-step incubation. The 304 stainless-steel chamber provides corrosion resistance and convenient cleaning. An ultraviolet lamp is installed for internal disinfection and contamination control. Removable shelves support flexible use of the large internal volume and loads of up to 15 kg per shelf. The side access port and waterproof internal socket enable temperature verification and combined procedures such as shaking incubation.

Power supply: AC 220 V, 50 Hz
Rated power: 1200 W
Calculated capacity: 350 L
Chamber dimensions: 580 × 600 × 1000 mm
Chamber material: 304 stainless steel
Temperature range: 0-70°C
Temperature display resolution: 0.1°C
Temperature uniformity: ±0.5°C at 37°C and 22°C ambient
Temperature fluctuation: ±0.5°C at 37°C and 22°C ambient
Continuous operation: Long-term above 18°C, intermittent defrosting required below 18°C
Timer range: 0-9999 min or h
Program control: 30 segments and 99 cycles
Sterilization: Ultraviolet lamp
Shelf material: 201 stainless steel
Standard shelves: 2
Maximum shelves: 8
Maximum shelf load: 15 kg
Side access port: 42 mm
Internal socket: 10 A
Net weight: 152.5 kg
Product dimensions: 855 × 840 × 1660 mm

Three-hundred-fifty-liter capacity
High-power temperature control
Thirty-stage programming
Stable heating and cooling
UV chamber disinfection
High-load removable shelves
Sensor access opening
Waterproof five-hole socket

STEM-BC-0388-ZJF
STEM-BC-0389-ZJF
STEM-BC-0390-ZJF
STEM-BC-0391-ZJF
STEM-BC-0392-ZJF