LC-PDB-3002 Powder Density Meter, 300 g Capacity and 0.001 g/cm³ Resolution (CAT#: STEM-BC-4056-ZJF)

The LC-PDB-3002 is a digital powder density meter for laboratory and quality-control applications. It combines an electronic balance, density software, and dedicated density accessories. The instrument applies the Archimedes immersion volume-displacement method with a special pycnometer. Density results are displayed directly on the large LCD screen. Temperature compensation and solution compensation can be configured according to the test conditions. Upper and lower density limits allow users to judge whether a sample meets specified requirements. A buzzer provides audible notification during operation. The RS232C interface supports connection to a computer or printer for data output. A built-in rechargeable battery enables use in locations without continuous mains power.

Power supply: 220 V, 50 Hz
Rated power: 10 W
Sensor: Domestic strain-gauge sensor
Weighing range: 0.01-300 g
Weighing resolution: 0.01 g
Density range: 0.001-19.999 g/cm³
Density resolution: 0.001 g/cm³
Measurement method: Archimedes immersion volume displacement with dedicated pycnometer
Temperature compensation: Included
Solution compensation: Included
Density limit setting: Upper and lower limits
Audible buzzer: Included
Communication: RS232C
Built-in battery: Included
Standard calibration weight: 100 g
Net weight: 2.5 kg
Product dimensions: 268 × 192 × 215 mm

Direct powder-density display
Three-hundred-gram weighing capacity
Archimedes displacement method
Temperature and solution compensation
Density acceptance limits
RS232C data output
Built-in rechargeable battery
Audible status notification

STEM-BC-1003-ZJF
STEM-BC-1010-ZJF
STEM-BC-1023-ZJF
STEM-BC-1026-ZJF
STEM-BC-1076-ZJF