LC-MJX-250BE Mold Incubator, 247 L and 800 W (CAT#: STEM-BC-3786-ZJF)

The LC-MJX-250BE is a 247 L mold incubator for research and laboratory culture applications. It is designed for storing cultures and cultivating molds and other microorganisms. The PID control system regulates chamber temperature from 0 to 70°C. Set and current temperatures are shown on the LCD for direct monitoring. A compressor, fan, and combined cold and hot air ducts promote uniform chamber conditions. The stainless-steel workspace has a clean geometric design and removable support shelves. A double-layer tempered-glass inner door permits observation while minimizing disturbance to the internal environment. Self-diagnostic control, timed operation, power-failure memory, ultraviolet sterilization, and overtemperature protection support dependable use.

Power supply: AC 220 V, 50 Hz
Rated power: 800 W
Display: LCD
Temperature range: 0-70°C
Temperature-control accuracy: ±1°C
Temperature uniformity: ±2°C
Timer range: 0-9999 min
Effective capacity: 247 L
Chamber dimensions: 500 × 550 × 900 mm
Standard shelves: 2
Maximum shelf load: 15 kg
UV sterilization lamp: 6 W
Chamber material: Stainless steel
Inner door: Double-layer tempered glass
Product dimensions: 740 × 705 × 1560 mm
Net weight: 106.5 kg
Operating condition below 10°C: Ambient temperature should not exceed 26°C

Two-hundred-forty-seven-liter volume
Eight-hundred-watt system
Uniform forced-air circulation
±1°C temperature control
Clean stainless-steel chamber
Full-view inner glass door
Timed incubation operation
Integrated UV lamp

STEM-BC-0388-ZJF
STEM-BC-0389-ZJF
STEM-BC-0390-ZJF
STEM-BC-0391-ZJF
STEM-BC-0392-ZJF