LC-DCY-12GP Dry Nitrogen Evaporator, 12 Positions (CAT#: STEM-BC-3415-ZJF)

The LC-DCY-12GP is a dry nitrogen evaporator designed for rapid sample concentration. It directs a continuous and controllable nitrogen flow onto the heated surface of each sample. The heating temperature can be selected according to the boiling point and evaporation rate of the solvent. A thermally conductive aluminum block provides uniform heating and responsive temperature control. Twelve independent blowing tubes help prevent cross-contamination between samples. Each gas-needle channel can be operated individually or in selected combinations. The LCD simultaneously displays set values and current operating data. Programmable multi-stage operation, automatic air cooling, calibration, and alarm functions support controlled processing.

Voltage/Frequency: AC 220 V, 50-60 Hz
Power: 200 W
Display: LCD
Positions: 12
Temperature range: Ambient +5°C to 150°C
Temperature accuracy at 37-100°C: ≤0.5°C
Timer: 1 min to 99 h 59 min or continuous
Maximum inlet pressure: 0.05 MPa
Gas needle: 2 mm diameter × 150 mm, 1.3 mm inner diameter
Maximum travel: 285 mm
Standard block: 16.5 mm diameter × 12 holes
Net weight: 6.5 kg
Dimensions: 330 × 200 × 540 mm

Twelve independent positions
Uniform aluminum-block heating
Up to 150°C operation
Multi-stage programming
Automatic air cooling
Independent gas control
Temperature calibration
Overtemperature and audible alarms

STEM-BC-0301-ZJF
STEM-BC-0302-ZJF
STEM-BC-0303-ZJF
STEM-BC-0304-ZJF
STEM-BC-0305-ZJF