Laboratory air supply system, Gas supply system, FENGJ (CAT#: STEM-LF-0079-LJX)

The high-purity gas central gas supply system is specially designed for the transmission of high-purity working gases used in high-precision analysis and testing equipment. Requirements for the use of various high-precision analysis equipment. The system should also meet the security requirements and facilitate the daily use and management of customers.

1. Since the stored gas contains flammable gas and combustion-supporting gas, It must be stored separately according to national regulations. Put them into different gas cylinder rooms.
2. A pressure-regulating panel is set up in the gas cylinder room, Of which there are 4 sets of two-support and one-panel with purged copper chrome-plated panels.
3. A sintered metal filter should be installed before the inlet of the pressure regulator to prevent impurities such as particles from contaminating the system.
4. All panels are equipped with purge valves, Which can realize the cleaning and replacement of panels.
5. The pressure regulator and related pipe fittings must be firmly fixed on the pressure regulating panel, And the panel should be designed compact and reasonable to minimize the dead volume in the system.
6. The pressure regulating panel shall be made of all stainless steel, And shall be firmly fixed in a reliable position to ensure its safety.
7. The gas cylinders stored in the gas cylinder room are fixed by a gas cylinder bracket with an anti-falling chain. The gas cylinder bracket is durable and beautiful. The gas bottle holder is made of aluminum alloy.
8. The gas cylinder in the gas cylinder room and the pressure regulator are connected by SS316L high-pressure metal hose without penetration. The high-pressure hose is a flexible hose to ensure the convenience of connection. It also has self-guided protective steel cables to prevent high-pressure "whiplash" accidents caused by damage to cylinder valves under extreme circumstances. The connection between the pressure regulator and the pipeline is a double-ring ferrule.
9. The cylinder connector on the high-pressure hose must match the specifications of the cylinder angle valve to ensure the reliability of the connection.
10. Exhaust air should be classified and collected, Fixed firmly and discharged to a safe place outside.

Efficient, Anti-pollution
Beautiful and environmentally friendly
With cleaning device

Laboratory Ventilation System Ducts, 6-10m/s, FENGJ (CAT#-STEM-LF-0078-LJX)
Laboratory air supply pressure reducing device, Alarm device, PERI (CAT#-STEM-LF-0028-LJX)
Wastewater Treatment Equipment, Sewage treatment, PERI (CAT#-STEM-LF-0033-LJX)
Laboratory ventilation system, 6-10m/s, FENGJ (CAT#-STEM-LF-0073-LJX)