Huamo BW8040 Reverse Osmosis RO Membrane, 400 (37) ft2(m2), Huamo (CAT#: STEM-GMAE-4836-LGZ)

Highlights

Brackish reverse osmosis membranes are often porous and rigid enough to flush out a disease that causes water-borne diseases and pathogens. The HUAMO BW membrane consists of three layers: a polyester support web, a microporous polysulfone interlayer, and an ultrathin barrier coating on the top surface.

Cat Number: STEM-GMAE-4836-LGZ

Application: It is suitable for desalination treatment of surface water, municipal water and other water sources, mainly used in industrial pure water, boiler feed water or brackish water applications such as high-concentration brine.

Model: BW8040




Description

BW series is an aromatic polyamide composite membrane element. It has the characteristics of low operating pressure, large water output and high desalination rate. It has a high removal rate for dissolved salts, TOC, SI02 and other substances, and is especially suitable for the preparation of high-purity water in the electronics and electric power industries.

Specification

Active Membrane Area, ft² (m²): 400 (37)
Stabilized Salt Rejection, %: 99.4
Minimum Salt Rejection, %: 98.8
Permeate flow rate, GPD (m³/d): 10,500 (40)

Test Condition:
Feed Water Pressure: 1.55MPa(225 psi)
Feed Water Temperature:25 C(77 F)
Feed Water Concentration: 2,000 ppm NaCl
Feed Water PH: 8

Maximum Operating Pressure: 41 bar(600 psi)
Maximum Operating Temperature: 45C(113℉)
Maximum Pressure Drop per Element: 1.0 bar (15 psi)
pH Range,Continuous Operation: 2-11
pH Range,Chemical Cleaning: 1-13
Maximum Feed Silt Density Index (SDI15): 5.0
Free Chlorine Tolerance: <0.1 ppm

1.Permeate flow rates for individual elements may vary ±15%.
2.Membrane active areas may vary +4%.
3.Stabilized salt rejection is generally achieved after continuous using for 24-48 hours,which depending on feed water qualities and operating conditions.

Features

Brackish reverse osmosis membranes are often porous and rigid enough to flush out a disease that causes water-borne diseases and pathogens. The HUAMO BW membrane consists of three layers: a polyester support web, a microporous polysulfone interlayer, and an ultrathin barrier coating on the top surface.

Related Products

Huamo UF-4046 Ultrafiltration UF Membrane, 90x1155mm, Huamo (CAT#-STEM-GMAE-4842-LGZ)
Huamo BW6040 Reverse Osmosis RO Membrane, 185 (17.2) ft2(m2), Huamo (CAT#-STEM-GMAE-4837-LGZ)
Huamo BW4040 Reverse Osmosis RO Membrane, 78 (7.2) ft2(m2), Huamo (CAT#-STEM-GMAE-4838-LGZ)
Huamo FRT-UF286 Ultrafiltration Membrane, 51m2, Huamo (CAT#-STEM-GMAE-4839-LGZ)
Huamo FRT-UF2880 Ultrafiltration Membrane, 77m2, Huamo (CAT#-STEM-GMAE-4840-LGZ)
Huamo UF-4040 Ultrafiltration UF Membrane, 90x1016mm, Huamo (CAT#-STEM-GMAE-4841-LGZ)