Horizontal Microplate Centrifuge HPC2500, 797 x g (CAT#: STEM-AL-6594-ZJF)

Horizontal Microplate Centrifuge HPC2500 is a laboratory centrifuge for controlled separation or spin-down of compatible samples. It is intended for tubes, microplates, cards, or other formats specified for the model. The motor-driven rotor generates centrifugal force to move suspended material according to density and sample geometry. Adjustable speed and timing controls support repeatable centrifugation protocols. The rotor or carrier arrangement secures the supported labware during operation. Safety monitoring functions are incorporated where specified to support controlled operation. The benchtop design is intended for routine sample-preparation and analytical workflows. The instrument provides reproducible centrifugal processing without manual handling during the run.

Model: HPC2500
Speed Range: 500-2500rpm
RCF Range: 32g-797g
Timer Range: 1min-30min
Noise Level: ≤55db(A)
Multi-Point Program: Supported, max 5 )
Multi-Point Cycles: Supported, max 99 cycles)
Power-Loss Recovery: Supported
Automatic Imbalance Detection: Yes
Capacity: 2 plates microplate deep-well plate
Maximum Input Power: 150W
Input Voltage: AC220V/50-60Hz
Overall Dimensions: 463x340x248mm
Weight: 15.7kg

Motor-driven centrifugal separation
Programmable speed control
Timed centrifugation
Dedicated rotor or carrier
Benchtop sample-processing format
Run-safety monitoring
Repeatable centrifugal processing