High And Low Temperature Alternating Damp Heat Test Chamber, Overall Dimensions 1450×1550×2100 mm, Internal Size 800×700×900 mm, -40℃-150℃, Shanghai Boxun Medical Biological Instrument Corp. (CAT#: STEM-GLE-0456-LGH)

High And Low Temperature Alternating Damp Heat Test Chamber, BXGDS-500B, Shanghai Boxun Medical Biological Instrument Corp.
7 inch HD touch screen, touch type operation, so that the display is more intuitive, easier to operate;
The BRIGHT ⅱ control system can automatically compensate the control parameter value according to the change of environment;
Built-in data management function: the controller can save the historical data record, can view the instrument temperature and humidity record curve, and support the use of U disk in unchangeable file format for viewing and backup, and trace the data;
The equipment has a circulating air volume regulation system to ensure that the air flow of the equipment has no dead Angle and the temperature distribution is uniform;
With controller password lock function, prevent random operation;
With program heating function, can control heating and cooling rate;
Support multi-segment number programming program setting;
With multi-point temperature calibration function, avoid the need for repeated calibration in different temperature and humidity conditions;
The humidification system is independent of the surface evaporation humidification system inside the cavity, which has the characteristics of low failure rate, good stability and convenient maintenance to ensure year-round uninterrupted operation.
Perfect protection function: upper and lower limit over temperature and over humidity alarm, over temperature stop protection, door opening alarm, water shortage alarm, sensor fault alarm, overload protection, leakage protection compressor over temperature protection, fan overheating protection, sample over temperature function, etc.

Temperature control range: -40℃-150℃
The temperature resolution: 0.1℃
Temperature fluctuation (37℃): ≤±0.5℃
Temperature uniformity (37℃): ≤±2℃
Humidity control range: 20-98%RH
Humidity resolution: 0.1%RH
Humidity fluctuation: ≤± 3%RH
Heating rate: ≥3℃/min
Cooling rate: ≥0.7℃/min
Tank size (L/W/H)mm: 800×700×900
Dimensions (L/W/H)mm: 1450×1550×2100
Shelf (block): 3
The supply voltage: 380V/50HZ

The BRIGHT ⅱ control system can automatically compensate the control parameter value according to the change of environment;
Built-in data management function: the controller can save the historical data record, can view the instrument temperature and humidity record curve, and support the use of U disk in unchangeable file format for viewing and backup, and trace the data;
The equipment has a circulating air volume regulation system to ensure that the air flow of the equipment has no dead Angle and the temperature distribution is uniform;